Description
Product Features
Digital control built on the #1 control valve in the US. Features dual drive motors for a stronger, longer lasting control valve.
Metered control with brine draw for water softeners
Measures water use and regenerates on demand
LCD display and touchpad controls for extended control & efficiency
At a glance information and simple interface
Ensures minimum regeneration requirements for best performance
Control each portion of the regeneration cycle
Ensures a long lasting valve
Product Description
For water softeners
Replace your old, worn out, or non-functioning control valve with a new, efficient digital metered control valve made by Fleck, the #1 manufacturer of control heads in the U.S.
The Fleck 2510SXT is one of the best control heads found on water softeners in the US, it's easy LCD display and touchpad controls make it easy to use. The 2510 features dual drive motors that result in a stronger, longer lasting control valve. The advanced features and the capacity for higher efficiency provide top of the line results. Backed by a 5-year warranty, this head will provide long lasting performance as well.
Metered control regenerates based on the amount of water used, not time, making it more efficient and enabling it to keep up with peak demands. For example, if you are out of town and water use is minimal, this control delays regeneration, saving salt and water. If you have extra company, this sytem increases regeneration frequency, ensuring you have treated water.
Digital SXT controller provides advanced options through an easy to use LCD display and touchpad controls. Higher gallon capacity can improve efficiency, using less salt and water to backwash on larger systems and/or systems used on low water hardness. At a glance display shows you the current time of day and how many gallons remaining until regeneration, as well as letting you know if a regeneration is scheduled. Full regeneration cycle control allows you to adjust all the parts of regeneration cycle for maximum control and performance. Regeneration day override allows you to achieve minimum system regeneration to ensure the best results.
Simple, time tested design uses a piston to control water flow. This allows for reliable performance and reduces maintenance cost and time.
Quick connecting bypass or yoke connections make it easy to disconnect the system from your plumbing should the need arise. NOTE: This head REQUIRES a Fleck yoke or bypass valave, if you do not have one you will need to add one in the order options above
Complete service manual included with basic installation, service, and maintenance instructions as well as parts diagrams
5-year manufacturers warranty ensures against defects and provides quality assurance.
