Description
Used for water supplies with high salts, high TDS with built in pump and auto flush!
5-stage system with a 50 GPD membrane and 5 filter stages blocks high sediment contamination. This 5-stage model is designed to ensure water quality, membrane performance and filter life where the incoming water contains a high amount of sediment as in some well water systems. An extra pre-filter stage is added before the membrane. This design can also be used to extend time between filter changes.
The booster pump is placed after the 3rd pre-filter in the 5-stage configuration. Systems with pump and AutoFlush option can be configured for water up to 4000 TDS.
High Volume Certified Systems
Standard Features on Booster Pump models
-
Auto shut-off valve (conserves water)
-
Flow restrictor – modified capillary
-
Long reach, non-airgap chrome faucet
-
Feed water connector – threaded inlet adapter with metal ballvalve
-
Drain connection included
-
1/4 inch flexible polyethylene tubing with Quick Connect fittings
-
24 VDC booster pump and tank pressure switch
For use in low water pressure situations. Use when the water pressure is below 40-psi, when the TDS is high or when more water is needed. The booster pump creates a pressure of 80 psi to run the RO membrane at peak efficiency. It is placed after the first stage sediment filter to reduce wear from sediment. A pressure switch located on the line to the storage tank turns the pump ON when the tank pressure is 25-psi and OFF when the tank pressure is 40-psi. The pump motor transformer plugs into a standard 110-volt outlet