Fleck 5600 Series

O-ring for Fleck 2510 and 5600 couplers or meter assembly (Fleck part# 13305). Product Features Coupler and Meter Assembly O-ring O-ring for Fleck 2510 and 5600 couplers or meter assembly (Fleck part# 13305) Product Description O-ring for Fleck...

The Top Distributor Basket is a twist on style for Fleck, Clack, and Autotrol valves that fits a standard riser tube of 1.05" diameter. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product...

Replacement coupler with built-in check valve used on Air Injection systems with 5600SXT or 2510SXT Product Features Check Valve Coupler Replaces cracked or worn-out check valve couplers used on Air Injection systems with 5600SE/SXT or...

The diffuser basket installs on the distributor tube directly underneath the control head to diffuse water through the air pocket that is injected into the tank during the backwash cycle, enhancing the oxidation of contaminants in the water. It just...

Replacement adapter coupling for 2510, 5600, 9000, and 9100 valves. Product Features Complete CouplingIncludes coupler, O-rings, clip, and screw to replace cracked or worn-out couplers Product Description Single replacement adapter coupling with...

Digital control head for water softeners Product Features Fleck 5600SXT Digital control built on the #1 control valve in the US For Water Softeners Metered control with brine draw for water softeners Metered Measures water use and regenerates on...

Seal and spacer kit for the Fleck 5600 and 9000 (upper only). These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part# 60125. ...

Flow meter assembly for Fleck 2510 & 5600 softener valves with screws, clips, and o-rings. Product Features Flow Meter Replaces cracked or worn-out flow meters on all Fleck 2510 & 5600 softener valves. Complete Includes flow meter, screws,...

O-ring for Fleck 5600 & 9000 control valve that fits on the bottom of the control head and seats against the tank to create water-tight seal (Fleck part# 12281). Product Features Tank O-ring O-ring for Fleck 5600 & 9000 control valve that...

Replacement motor for the Fleck 5600 control head (Fleck part# 18743-1). This is also used on the Fleck 3200/3210 timer assembly (used on Fleck valves 2500, 2510, 2750, 9000, 9100, & 9500). This is the 120V, 60Hz motor with 1/30 RPM. This replaces...

Rebuild kit for the Fleck 5600 softener valve. Kit includes piston assembly (Fleck part# 60102-00), seal and spacer kit (Fleck part# 60125), and brine valve piston assembly (Fleck part# 60032). For the Fleck 5600 filter valve rebuild kit, see...

Replacement brine injector nozzle and brine injector throat for Fleck 5600 and 5600SXT valves. Product Features Replacement Brine Injector NozzleNew injector nozzle in the size required for your tank Replacement Brine ThroatNew injector throat in the...