Fleck 5800 Series

Fleck Part #61956-01 Replacement piston, seal, and spacer kit Fits Fleck 5810SXT and 5810XTR2 downflow softeners Replacement piston, seal, and spacer kit for Fleck 5810 series downflow softener valves. The downflow softener valve is the most common...

Riser Tube 1.050" x 54" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media.

Fleck Part #61837 Replacement piston, seal, and spacer kit Fits Fleck 5800LXT, 5800SXT, and 58XTR2 downflow valves Replacement piston, seal, and spacer kit for Fleck 5800 series downflow valves. The downflow valve is the most common. Over time...

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to connect to 3/8" Poly Brine Line. For use in 28" Brine Wells for 11" x 38", 15" x 17" x 36" and 18" x 33" Brine Tanks. **If you need to...

Fleck 1-1/4" Kit 5810/12 Connectors, NPT Fleck 1-1/4" Kit 5810/12 Connectors, NPT

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

Fleck 1" Kit 5810 and 5812 Connectors, PVC NPT, Set of Two.

Fleck 1-1/4" x 1-1/2" Kit 5810/12 Connectors Sweat (Set of 2) 61991-07

Replacement motor assembly Part #61835 Fits Fleck 5800, 5810, and 5812 control heads Replacement motor for the Fleck 5800 series. This includes the 5800, 5810, and 5812, and supports LXT, SXT, and XTR2 controllers.

Fleck Bypass, 5810 and 5812 Base Only, Plastic Fleck Part 43644

This kit includes 10ft of 1/2" ID clear drain line (5/8" OD), stainless steel hose clamp, and a roll of teflon tape. The stainless steel hose clamp is used to secure the drain line on the barbed drain fitting on the Fleck control head. Teflon tape is...

Fleck 3/4" x 1" Kit 5810/12 Connectors Sweat (Set of 2)

Fleck 5810/12 Elbow Adapter Set  Requires you also use matching Adapter Connectors.NOTE: Not for 5800 valve