Description
Reach out to us today at support@afwfilters.com or 785-661-2241 to discuss what system will work best for you!
- Fine mesh resin for softening and moderate level iron removal
- 10lbs KDF 85 media for hydrogen sulfide (rotten egg odor)
- Choice of tank color and connection size
- Complete system with Digital Metered Valve, bypass, and brine tank
- Two cubic foot system for larger homes or higher hardness, max capacity 64,000 grains (64k)
- Included booklet covers setup, installation and programming, with images and access to videos so most people can install the system on their own
- Service flow: 10 GPM
- Peak flow: 15 GPM
- Flow required for backwash: 4 GPM
Flow meter measures water and regenerates based on water use, not time, conserving salt and water
Contains 2 cubic feet of fine resin capable of removing up to 64,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles
Designed to remove hydrogen sulfide (rotten egg odor), chlorine, and a wide range of heavy metals, chlorine
Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm
Treats a maximum flow rate of 16 gallons per minute
Ion exchange process physically removes the ions that cause hard water
Specially designed resin traps iron and manganese as well as the hardness. This is for moderate levels of iron.
KDF85 treats low levels of hydrogen sulfide, the cause of rotten egg odor in water
High quality, whole home water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration with the WS1 offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Match the size to your plumbing for simpler installation.
Main resin tank is approximately 12" in diameter. Brine tank is approximately 18" in diameter by 33" tall, both tanks will be in the selected color. Capable of removing up to 6 ppm of ferrous iron without additional systems required. If ferric iron or higher levels of iron are present a separate iron filter is recommended. System comes with 2 cubic feet of resin capable of removing a maximum of 64,000 grains (64k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).
Please Note: 12” tanks are shipped in either the 48” height or 52” height, depending on availability. If you have a specific requirement please add it to your notes when checking out and we will do our best to accommodate you.
