Description
- Fine mesh softening resin for iron removal up to 6-8ppm
- Choice of tank color and connection size
- Complete system with Fleck 2510 Metered Valve, bypass, brine tank, and installation instructions
- Two cubic foot system for larger homes or higher hardness, max capacity 64,000 grains (64k)
- Included booklet covers installation and setup, with images and access to videos so most people can install the system on their own
High quality, whole home water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration with the Fleck 2510 offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.
Main resin tank is approximately 12" in diameter. Brine tank is round and approximately 18" in diameter by 33" tall, all tanks will be in the selected color. System comes with 2 cubic foot of fine mesh resin capable of removing a maximum of 64,000 grains (64k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry). Fine mesh resin also has the capacity to remove up to 6-8ppm of ferrous (dissolved) iron.
Please Note: 12” tanks are shipped in either the 48” height or 52” height, depending on availability. If you have a specific requirement please add it to your notes when checking out and we will do our best to accommodate you.
