Fleck 2510 Series

Stuffer tool PLUS seal and spacer kit for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including constant water down the drain line, poor backwash, incomplete...

Piston, seal and spacer kit, stuffer tool, PLUS silicone lubricant for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including constant water down the drain line,...

Stuffer tool PLUS seal and spacer kit for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including constant water down the drain line, poor backwash, incomplete...

The puller tool makes replacing the seals & spacers in the Fleck 2510, 2700, 2750, and 2900 heads much easier and saves you time. The puller tool isn't necessary, but it is highly recommended for ease of maintenance. Instructions are included on...

Service and rebuild kit for Fleck 2510 AIO (Air Injection) Piston, seals, and spacers - 61670-00 (61662-01) Inlet check valve coupler - 19228-02 Air draw check valve - 62116 Fixes most common problems on Air Injection control heads Fleck 2510...

Rebuild kit for the Fleck 2510 softener valve. Kit includes piston assembly and seal & spacer kit, and brin valve (Fleck part# 61670-00 and 60011). For the Fleck 2510 filter valve rebuild kit, see FP-61670-00. Product Features Fleck 2510...

Part #44144 For 2510, 2750, 2850, 2900, 3150, and 3900 valves with 24v motor Input: 120V 50/50Hz 15W 1.66 Amps Replacement transformer for valves with 24V motor.

Flow meter assembly for Fleck 2510 & 5600 softener valves with screws, clips, and o-rings. Product Features Flow Meter Replaces cracked or worn-out flow meters on all Fleck 2510 & 5600 softener valves. Complete Includes flow meter, screws,...

Paddlewheel flow meter assembly for digital SE/SXT Fleck 2510, 5600, 9000, and 9100 softener valves. Includes screws, clips, O-rings and flow straightener. Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all digital...

Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all mechanical/Econominder Fleck 2510, 5600, 9000, and 9100 softener valves. Complete Includes flow meter, screws, clips, O-rings and flow straightener. (Does...

Replacement motor for the Fleck 5600SXT & SE control head (Fleck part# 16944). This is also used on the Fleck 6600/6700 valves. This is the 24V, 60Hz motor with 2 RPM. Product Features Replacement Motor Drive motor is used in the Fleck...