Fleck 5600 Series

Brine line flow control (BLFC) button 0.25 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12094

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Discontinued by manufacturer- limited availability  Product Features Meter Cable...

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

Replacement piston assembly for the Fleck 5600 mechanical filter valves. The piston wears out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-10. Product Features Fleck 5600...

Cover for Fleck 5600 Valve with "L"-style bracket Offers additional protection for the head This cover for the Fleck 5600 Valve with "L"-style bracket slides down over the valve to offer additional protection from the elements. This cover is...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

Center plug for Fleck bypass valves. Fleck part #11972

Replacement piston assembly for the Fleck 5600 mechanical softener valve. The piston wears out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-00. Product Features Fleck 5600...

Main gear & shaft for the Fleck 5600 control head (Fleck part# 13170). This is typically the only gear that may break or wear out. Product Features Idler Gear   Fleck Part# 13017 This is a genuine Fleck part and is part# 13017 Product...

Fleck 5600 Stainless Steel 1" Yoke

60125-15 Chloramine Resistant Top Seals And Spacers Kit for Fleck 5600, 9000, and 9100 Valves.*NOT for Hot Water (that is PN 60125-05)The material of the seals has three times the Chloramine resistance of the previous silicone material used.The new seals...

Clip for use with Fleck turbine meters to connect to control head For turbine meters only. Part 19569

PISTON ROD only, Fleck 5600, PN 13001.

DISCONTINUED BY MANUFACTURER, limited availability  End Plug Fleck 5600 9000 PN 13446This part is included in the complete Piston Assembly, PN 60102-00. We recommend replacing the entire assembly. As shown in the 2nd photo, the older end plugs...