Fleck 5600 Series

O-ring for Fleck 2510 and 5600 couplers or meter assembly (Fleck part# 13305). Product Features Coupler and Meter Assembly O-ring O-ring for Fleck 2510 and 5600 couplers or meter assembly (Fleck part# 13305) Product...

The Top Distributor Basket is a twist on style for Fleck, Clack, and Autotrol valves that fits a standard riser tube of 1.05" diameter. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product...

Replacement adapter coupling for 2510, 5600, 9000, and 9100 valves. Product Features Complete Coupling Includes coupler, O-rings, clip, and screw to replace cracked or worn-out couplers Product Description Single replacement adapter...

Replacement coupler with built-in check valve used on Air Injection systems with 5600SXT or 2510SXT Product Features Check Valve Coupler Replaces cracked or worn-out check valve couplers used on Air Injection systems with 5600SE/SXT or...

The diffuser basket installs on the distributor tube directly underneath the control head to diffuse water through the air pocket that is injected into the tank during the backwash cycle, enhancing the oxidation of contaminants in the water. It just...

Replacement clip for Fleck valves Part Number 13255 Replacement clip used on paddlewheel meters, bypass valves, and yoke connections on popular Fleck control heads including the Fleck 2510, 5600, 9000, and 9100. Use with Fleck screw - part number...

Replacement brine injector nozzle and brine injector throat for Fleck 5600 and 5600SXT valves. Product Features Replacement Brine Injector NozzleNew injector nozzle in the size required for your tank Replacement Brine ThroatNew injector throat in the...

Riser Tube 1.050" x 54" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media.

O-ring for Fleck 5600 & 9000 control valve that fits on the bottom of the control head and seats against the tank to create water-tight seal (Fleck part# 12281). Product Features Tank O-ring O-ring for Fleck 5600 & 9000 control valve...

Tool used to remove drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves.

Standard screw commonly used on Fleck valves. Most common use is the adapter clips used on bypass valves, meters, and couplers. Can also be use on the standard cover for Fleck 5600 valves.

Replace damaged connections or use on replacement Fleck valves. Fits all Fleck 2510, 5600, & 9000 valves. Product Features Plastic Yoke Fits all Fleck 2510, 5600, & 9000 valves 3/4" Connection 3/4-inch male NPT...

Replacement brine fitting kit for Fleck 5600 and 5600SXT valves. Product Features Replacement Brine Fitting kitInclude brass nut, ferrule, insert, and screen Genuine Fleck PartThis contains genuine Fleck parts 60900-38 Product Description Replacement...

Replace damaged connections or use on replacement Fleck valves. Fits all Fleck 2510, 5600, & 9000 valves. Product Features Plastic Yoke Fits all Fleck 2510, 5600, & 9000 valves 1" Connection 1-inch male NPT...

Upper Basket - Upper basket installs on the bottom of many Fleck, Clack, and Autotrol control valves to help prevent media getting pushed into plumbing due to pressure bursts and incorrect plumbing Fine Mesh - Smaller slits allow for use with fine mesh...