Fleck 9000 & 9100 Series

Drain line flow control (DLFC) button 5.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12092

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

Drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves. Holds drain line flow control button in place. O-ring included.

Brine line flow control (BLFC) button 0.5 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12095

Drain line flow control (DLFC) button 2.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12087

Drain line flow control (DLFC) button 2.4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12088

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to connect to 3/8" Poly Brine Line. For use in 28" Brine Wells for 11" x 38", 15" x 17" x 36" and 18" x 33" Brine Tanks. **If you need to...

Paddlewheel flow meter assembly for digital SE/SXT Fleck 2510, 5600, 9000, and 9100 softener valves. Includes screws, clips, O-rings and flow straightener. Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all digital...

Drain line flow control (DLFC) button 3.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12089

Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510 Control Valves Product Features Piston Rod Retainer Connects piston rod to main piston Product Description Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510...

Hot water seal and spacer kit for the Fleck 5600 & 4650 valves. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part#...

Drain line flow control (DLFC) button 4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12091

Lower seal and spacer kit for the Fleck 9000 & 9100 valve. These wear out over time and can cause your control head to leak, work inefficiently, or not work at all. This is the entire lower seal & spacer kit needed to replace your old ones...

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...