KL Media - 1 cu ft
- Ships within 1-2 days
For removal of iron, hydrogen sulfide (sulfur), and manganese
Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or oxidized) iron.
The cause of rotten egg odor. Incorrectly referred to as sulfur most of the time.
Can cause black slime buildup in toilet tanks and may impart a metallic taste to the water
KL media is rated for 5-12 GPM service flow per square foot of tank area
Filox* requires 8-10 GPM per SQUARE foot of tank area for backwashing
Advanced media offers reliable treatment with reduced waste water
8"x44" Tank - 0.5 cubic foot
9"x48" Tank - 1 cubic foot
10"x54" Tank - 1.5 cubic feet
12"x48" Tank - 2 cubic feet
13"x54" Tank - 3 cubic feet
Note: Sizing not applicable to Air Injection systems. For sizing air injection systems, remove 0.5 cubic foot for your tank size, e.g. a 10"x54" Air Injection system only uses 1 cubic foot of media
Service flow rate is the manufacturers recommendation for maximum contaminant removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminant levels MAY allow higher treatment flow rates.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced.
Mark B. Is knowledgeable, friendly, and honest! Would recommend these folks to anyone!