Replacement Parts, Resin, & Media

Brushed Nickel FinishAir GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/8 inch mounting hole Air Gap Include extra 2 barbs required for air gap installs. If air gap is not...

C-Series 1" PVC M Adapter (2) 1" PVC MIPT Straight Adapters Set of 2 for "C-Series" Control Valves     ITEM SPECIFICATIONS Material PVC Size 1" Type Connector Valve Model C-Series Valve Model WS1.25 Valve Model NWTS,...

Product Features Aquatec ERP 500 Quieter permeate pump makes less noise for systems rated at 50 GPD or less Reduces Waste Reduces back pressure from the tank, maximizing system efficiency and water purity Non-electric Hydraulically powered,...

Fits Pentek big blue housings that hold 4.5" filters Inner diameter ~7 inches Outer diameter ~7.75 inches Replacement filter housing wrench used to help remove filter housings when changing filters on Pentek big blue filter systems.

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the tank pressure exceeds 40 PSI or the ESO (if applicable)...

The Axeon HF1-2540 low energy RO membrane elements can be used with many commercial RO systems, measure 2.5" x 40", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty. Product Features Replacement Membrane Axeon...

Replacement membrane housing for standard sized reverse osmosis membranes. Fits standard membranes that measure approximately 1.75-inch in diameter and 11.75-inch in total length, which are usually denoted by -inch1812-inch in the model or part number...

The under-sink connection kit includes the slip joint adapter, a 1/4-inch ball valve, and a 1/4-inch quick-connect drain saddle valve. The kit can be used to connect reverse osmosis systems underneath the sink. Product Features Slip Joint Adapter The...

12-inch x 48-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 1.75 cubic feet filtering systems and 64K water softeners. Includes base and available in 3 different colors; riser tube and...

Replacement o-ring for use on the Fleck 9100 and 9100SXT 2nd tank adapter yoke assembly. Qty 4 on the crossover pipes.

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

Brass Drain Fitting for Fleck 2510 control valve. Product Features Brass Drain FittingHeavy duty replacement drain fitting on Fleck 2510 control valve, includes O-ringFitting Only (No flow control)This is the fitting only and does not include the...