Replacement Parts, Resin, & Media

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

The 1600 Brine Valve Short Stem is commonly used in the Fleck 1500 and 2500 models. The piston assembly (part#60029) should be replaced if the brine refill never stops (valve is stuck).The 1600 (or 3/8" tubing size) valve is normally used on...

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the tank pressure exceeds 40 PSI or the ESO (if applicable)...

The wiring"Y" harness is required to connect the ESO to the Aquatec booster pump and the transformer. Product Features Wiring "Y" Harness The wiring "Y" harness is required to connect the ESO to the Aquatec booster pump and the transformer. Aquatec...

Brushed Nickel FinishAir GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/8 inch mounting hole Air Gap Include extra 2 barbs required for air gap installs. If air gap is not...

6-inch x 35-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 0.5 cubic foot filtering systems, and 16K water softeners. Includes base and available in 2 different colors; riser tube and...

Fleck Seal O-Ring

Fits Pentek big blue housings that hold 4.5" filters Inner diameter ~6 inches Outer diameter ~6.75 inches Replacement filter housing wrench used to help remove filter housings when changing filters on Pentek big blue filter systems.

Brine line flow control (BLFC) button 0.25 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12094

10-inch x 54-inch mineral and resin tank with dome loading port commonly used for 1.5 cubic foot pH filters Product Features 10-inch x 54-inch10-inch x 54-inch tank is commonly used on 1.0 cubic foot air injection systems, 1.5 cubic feet filtering...

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Discontinued by manufacturer- limited availability  Product Features Meter Cable...

Union Fitting - Splice two lines together to form a longer line 1/4" Quick Connect to 3/8" Quick Connect - Connects to standard 1/4-inch tubing to 3/8-inch tubing used on some filter systems and RO systems

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Standard Square Brine Tank Includes 4" Brine Well snf Safety Float Standard Black Color Holds approximately 275 lb of salt Measures 15"x17"x36" Standard square brine tank used with Autotrol control valves. Approximately 15"x15"x36" and holds...

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...