Replacement Parts, Resin, & Media

Brass Drain Fitting for Fleck 2510 control valve. Product Features Brass Drain FittingHeavy duty replacement drain fitting on Fleck 2510 control valve, includes O-ringFitting Only (No flow control)This is the fitting only and does not include the...

Genuine Fleck Part #60425-16 Complete Tube Assembly for 13-16 inch tanks Tube assembly for Fleck 9100 valves on 13-16 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

The shut off switch kit includes the electronic shut off (ESO) switch, the tank shut off (TSO) switch, and the wiring harness for Aquatec booster pumps. This kit, when added to your stand-alone booster pump, will automatically shut off the water supply...

Kit contains 3 Clack part #'s for the Clack WS1 Control Valve Contains Downflow Piston V3011 Contains Brine Regenerant Piston V3174 Contains Spacer Stack V3005 This kit replaces the main interior parts of the Clack WS1 water softener/filter control...

Universal Clack Brine Salt Grid for 24" Round Brine Tanks   **No Leg Assembly Included** These are purchased separately 

Cover for Fleck 5600 Valve with "L"-style bracket Offers additional protection for the head This cover for the Fleck 5600 Valve with "L"-style bracket slides down over the valve to offer additional protection from the elements. This cover is...

Fleck 19620-01 Angle Adapter, 3/4" MNPT 90° angle yoke assembly compatible with the Fleck 5600 and Fleck 2510 valves Allows you to mount the bypass valve up or down instead of straight back. Easy to adapt.

The 1600 Brine Valve Short Stem is commonly used in the Fleck 1500 and 2500 models. The piston assembly (part#60029) should be replaced if the brine refill never stops (valve is stuck).The 1600 (or 3/8" tubing size) valve is normally used on...

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Product Features Meter Cable for Paddlewheel Meter Replaces cables that are no longer...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

Replacement piston assembly for the Fleck 5600 mechanical filter valves. The piston wears out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-10. Product Features Fleck 5600...

Replacement motor for the Fleck 5600SXT & SE control head (Fleck part# 16944). This is also used on the Fleck 6600/6700 valves. This is the 24V, 60Hz motor with 2 RPM. Product Features Replacement MotorDrive motor is used in the Fleck 5600SXT & SE...

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the tank pressure exceeds 40 PSI or the ESO (if...

Complete booster pump kit to upgrade standard reverse osmosis systems Product Features Complete Kit CDP 8800 Pump110v TransformerESO SwitchTSO SwithY-harnessTubingInstructions Booster Pump Increases pressure to your system for better production and...

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.