3.0 cu ft Digital Tannin Softener with Fleck 2510SXT
- Ships within 1-2 days
Clear up your murky, tea-colored water AND remove hardness from your water with this combination water softener & tannin system. The 3.0 cubic feet Digital Tannin Softener with Fleck 2510SXT uses high capacity softening resin combined with tannin specific resin to filter your water.
14-inchx65-inch resin tank
Riser tube with distributor basket
3.0 cubic feet total resin
Digital Fleck 2510SXT Metered Control Head
Choice of connection
Standard Brine Tank with Safety Float
Flow meter measures water and regenerates based on water use, not time, conserving salt and water
Contains 1.0 cubic foot of tannin specific resin capable of removing up to 3 ppm of tannins. Contact us if you have higher than 3 ppm tannin.
Contains 2.0 cubic feet high capacity softening resin capable of removing 64,000 grains of hardness between regeneration cycles
Treats a maximum flow rate of 16 gallons per minute
While tannins are not harmful, they are not aesthetically pleasing and can range from a light yellow color to a dark tea color.
Ion exchange process physically removes the ions that cause hard water
Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes
Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.
Dependable digital metered head provides efficient treatment using a durable dual-motor design for less wear on each motor. The digital head provides a more user-friendly system with a LCD display, push-button operation, and additional programming options.
Durable, high quality polyglass tank made by a trusted name in tank manufacturing
Used for holding salt used during the regeneration process. Measures approximately 15-inchx17-inchx33-inch and holds approximately 250 lbs of salt
Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.
Tannin is decayed organic material and is present in many water supplies but goes unnoticed do to its low levels. While tannins are not harmful to your health, they are not aesthetically pleasing and can range from a light yellow color to a dark tea color. As a matter of fact, tannin is what gives your tea and coffee its dark color
To keep costs down, most people use a system that combines tannin specific resin with standard softening resin. These combo systems provide all the benefits of a tannin filter with the softening ability of a water softener. The lower cost of softening resin also provides a lower price than the tannin only systems.
Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry.
Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Automatic regeneration initiated by a high quality Fleck metered head means high efficiency, consistent water treatment, and low maintenance. Soft water will extend the life of your appliances, decrease soap requirements, and decrease the occurrence of soap scum. Softer hair and skin are also common when using water that has been softened.
Controlled by the low cost Fleck 2510SXT, this system provides durability and efficiency in an economical package. The 2510 control head is metered, meaning it measures the amount of water used and regenerates only as needed! On vacation? This system will delay regeneration until you return, reducing salt and water consumption. Lots of company? This system keeps up, providing additional regenerations to accommodates the increased water use. Want something simple to set-up? The digital head is more user-friendly than the standard mechanical head with an LCD display, push-button controls, and more user options. Additionally, the Fleck 2510SXT has a durable dual-motor design for less wear on each motor. Backed by an outstanding 5-year warranty and tested to withstand up to 27 years of continual use, you can be sure you are getting a system that will last.
The durable polyglass resin tank is manufactured by Structural USA and is backed by a 10 year warranty. The simple design allows for installation almost anywhere without being unsightly, and optional tank jackets provided added aesthetics for high visible areas. NOTE: Tank color may vary from the one shown
This system comes complete with a brine tank that includes a float assembly for added reliability and peace of mind. Capable of holding up to 250 lb of salt, the large capacity of this brine tank requires infrequent addition of salt and reduces maintenance. NOTE: Color and design may vary from the system pictured
Simple connections and simple set up make this system great for DIYers. Detailed online installation instructions offer a step-by-step guide on proper installation and set up of the system on installation
A. A water softener is a special filter that uses a process called ion-exchange to remove water hardness, also know as CaCO3, from your water. As the water passes through the softener, univalent sodium or potassium ions on the softening resin exchange with divalent calcium and magnesium ions in the water, eliminating water hardness. Eventually the media in the softener (called softening resin) has exchanged all of its sodium or potassium ions, at which point it will no longer be able to remove any more water hardness. This is why the system regenerates. During this process the system runs a brine solution (water and either sodium or potassium chloride) backwards through the softening resin. This concentrated solution forces the trapped calcium and magnesium ions off the resin and down the drain, replacing them with the sodium or potassium ions needed for softening. With the Fleck control heads, this process is automatic, and only as needed!
A. Water hardness is usually measured in grains per gallon (GPG). (Some places use parts per million [ppm] or milligrams per liter [mg/L]. To convert your ppm or mg/L to GPG simply divide by 17.1 [Example - 200 ppm or mg/L is equal to 200 / 17.1 = 11.7 GPG]) The grain capacity of a system is how many grains of hardness your system can remove before it needs regenerated. A 32,000 grain or 32k water softener will remove 32,000 grains of water hardness. From that you can determine how many gallons of water you can go through between regenerations. If you have a 32k softener and your water is 15 GPG hard, you can go through 32,000/15=2,133 gallons of water before your softener is exhausted and needs regenerated.
A. There are 2 main factors in determining the size you need: water usage and water hardness. Here is a general guideline on sizing your system: 32k system - 1-2 people, average water use and low hardness (under 15 GPG) 48k system - 3-5 people with average water use or moderate hardness (15-45 GPG) 64k system - 5-7 people with average water use or high hardness (45-65 GPG) Service Flow Rate is the maximum amount of water, in gallons per minute (GPM) that a given system can effectively treat. Always size a system based on water usage first, a system undersized for your water usage may not always filter effectively and will wear out faster.
A. Yes, we carry a high quality salt free water conditioner that eliminates hard water problems. Our Scale Sentry system utilizes a specialized media called Filtersorb to provide the same benefits a standard softener offers without the use of salt. In addition, beneficial minerals are left in the water and existing scale is removed as well! In our experience our systems outperform other salt free units, including the "magnetic" and electric systems that are widely available.
A. No. The amount of salt put into your water by a water softener is minimal. In fact, in most cases it is low enough that water ran through a softener is still considered "low-sodium" by the FDA. If you want to avoid adding additional sodium to the water all our water softeners can be used with potassium chloride instead of the traditional sodium chloride. If you want to safe drinking water, our drinking water RO systems can turn your ordinary household water into bottled quality drinking water.
A. The Fleck 5600 is your basic mechanical control valve. It does it's job in the most cost effective way possible. It is a metered head so it measures how much water you go through and regenerates based water usage. Due to the mechanical limitations on the head it can only be set to 2,100 gallons, at that point it has to regenerate, so some efficiency can be lost depending on the system size and your water hardness. This head is ideal if you are looking for the lowest cost option. The Fleck 5600SXT works similar to the standard 5600 but uses a digital interface instead of a mechanical one. This makes setup easier, and with the digital control it can be set to go through up to 9,999 gallons of water between regenerations. The 5600SXT can be more efficient that the 5600 because of this, especially in larger homes with lower hardness levels. The other advantage the 5600SXT has is adjustable regeneration cycles, while in most cases these settings won't need to be adjusted, with the 5600SXT the option is there should you ever need it.
A. The only regular maintenance a water softener requires is adding salt to the brine tank, and occasionally cleaning the brine tank.