Description
Product Features
12-inchx48-inch resin tank
Riser tube with stacked distributor basket
Fleck 2510SXT digital Control Head
2.0 cubic feet ASM-10-HP
Gravel Bed
Choice of connection
Designed for 3 bathrooms and 5-7 people and/or homes with flows matching system capacities
Maximum level allowed by EPA is 10 ppb (.010 ppm). System removes up to 99% of arsenic.
Removes As+5, no matter the ration to As+3
Removes As+3 when it makes up less than 20% of the total arsenic in the water. Higher levels require pre-chlorination (see "Options" tab above) or a different system, such as the AdEdge system.
Treats a maximum flow rate of 18 gallons per minute, but 8-12 gallons per minute is recommended for continual flows
The more durable and dependable 2510SXT has an LCD display and touchpad controls provide easy to use interface, shorter backwash times, and reduced waste water.
Durable, high quality polyglass tank made by a trusted name in tank manufacturing
Resintech ASM-10-HP is a strong basic hybrid anion exchange resin specifically formulated to be highly selective for the removal of arsenic
Exhausted media is non-hazardous and can be disposed of with normal household waste.
Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.
Product Description
Arsenic is a known carcinogen, increasing the risk of cancer even at very low concentrations. Arsenic occurs naturally in many groundwaters throughout the USA, less commonly in surface waters. With the recent passage of new limits restricting arsenic levels in potable water, many public water supplies require arsenic reduction prior to use.
RESINTECH ASM-10-HP is a strongly basic hybrid anion exchange resin specially formulated to selectively remove arsenic. It is supplied in the salt form as clean, moist, tough, uniform, spherical beads. ASM-10-HP is an excellent choice for arsenic removal when As+3 makes up less than 20% of the total arsenic, which is less than 50 ppb (.05 ppm).
Controlled by the Fleck 2510SXT control head, this system automatically backwashes. The backwash process uses no chemicals, simply using the force of water to clean the media and flush the contaminants down the drain. Made by Fleck, the #1 manufacturer of control heads in the US, the digital control head provides LCD display and touchpad controls, allowing for simple, user-friendly interation. The 2510 valve also offers dual drive motors, providing dedicated control for piston movement and system timing. This allows for stronger piston control, fewer parts (since there are no connecting gears required) and longer, more reliable operation.
More Info
- Qty Needed:2
- Qty Needed:20
Service flow rate is the manufacturers recommendation for maximum contaminant removal at a constant flow. Intermittent flow rate and/or lower contaminant levels MAY allow higher treatment flow rates.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, using less than the recommended flows WILL void the 30-day satisfaction guarantee. Warranties on the tank and control valve will remain unaffected.
