Filter-Ag Plus Media - 1.0 cu ft

(No reviews yet) Write a Review
SKU:
AGP-10
UPC:
783583351515
MPN:
AGP-10
Availability:
Ships within 1-2 days
$99.00

Description

Product Features

1.0 cubic foot Filter-Ag Plus

For advanced removal and finer filtration of turbidity and sediment in water

Eliminates Turbidity

Clears up murky and cloudy water caused by suspended particles in the water

5µ Sediment Removal

Removes floating particulates and sediment as small as 5µ, compared to 20µ for standard Filter-Ag media

12-20 GPM/ft2 Service Flow

Filter-Ag Plus is rated for 12-20 GPM service flow per SQUARE FOOT of tank area

Min. 15 GPM/ft2 Backwash Flow

Filter-Ag Plus requires 15-20 GPM per SQUARE foot of tank area for backwashing

Product Description

Highly efficient Filter-Ag Plus media is a clinoptilolite media providing for the advanced reduction and filtration of suspended matter and for clearing up turbidity. The light weight of the media allows for high service flow rates and lower backwash rates. Replacing sand or standard Filter-Ag with Filter-Ag Plus media in existing installations may increase filter capacity up to 100% (when replacing sand). Amount of media needed can be determined by tank sizes below

8"x44" Tank - 0.5 cubic foot

9"x48" Tank - 1 cubic foot

10"x54" Tank - 1.5 cubic feet

12"x48" Tank - 2 cubic feet

13"x54" Tank - 3 cubic feet

More Info

Operation Conditions Physical Properties
Active Ingredient clinoptilolite Color Light tan to near white
Service Flow 12-20 GPM/ft² Physical Form Granular
Freeboard Minimum 50% Screen Size 14 x 30
Backwash Rate 15-20 GPM/ft² @ 60°F Bulk Density 50 lb/cubic feet
Bed Depth 24"-36" Odor & Taste none
pH Range Wide range Standard Package 1 cubic foot bags (50 lb)
Removal Capacity Life Expectancy
Sediment Manufacturer: 10+ years
Typical Results: 8-10 years average dependant on contaminant levels, backwash flow rates, and backwash frequency
Service Flows
Service flow rate is the manufacturers recommendation for maximum contaminant removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminant levels MAY allow higher treatment flow rates.

Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced.
View AllClose

0 Reviews

View AllClose