Replacement Parts, Resin, & Media

1 cubic foot of 10% crosslink resin for water softeners Product Features 1 cubic foot High Capacity 10% Crosslink Resin Durable resin for treatment of hard water Product Description 10% crosslink softening resin for use in most water softening...

Spin-Down filter with 1" connections for sand and sediment separation. Product Features 1-inch 1-inch slip connections for easy installation 1-25 GPM Will treat flow rates between 1 and 25 gallons per minute Drain Port Drain port...

Fleck 2310 brine tank safety shut off valve with 3/8" brine line and pick-up tube connections. Does not include the float assembly. Fleck part# 60014. Product Features 2310 Safety Brine Valve Fleck 2310 safety brine tank valve prevents overfilling of...

Replacement O-ring for standard sized (2.5x10) filter housings to replace cracked or torn o-rings that would allow water to leak

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

The 1/4-inch nylon hex nipple has male NPT connections on both ends and is made of durable nylon that works with PVC, CPVC, PEX, copper, brass, and any other place 1/4-inch plumbing is used. These are commonly used between filter housings on drinking...

Birm for iron and manganese Product Features 1.0 cubic foot Birm For removal of iron and manganese from water supplies Removes up to 8 ppm iron Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved)...

The Top Distributor Basket is a bayonet-style twist-on basket for Fleck 7000 control valve that fits the larger 32mm distributor tube. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product Features...

Replacement filter housing for standard 10" filters Product Features White Housing Blocks UV rays 1/4" Threaded In/Out Standard size accommodates a wide variety of fittings Mounting Holes Allows for easy connection to standard mounting...

Adapter base for Fleck 2510 control head (Fleck part# 19322). The adapter base threads are 2.5-inch and fit standard mineral tanks. This is the adapter base only and doesn't include the base seal, clamp, slip ring, or any o-rings (see "Related Products"...

Replacement media, gravel, and funnel For Gold Series 1 cu ft Includes 1 cu ft Catalytic Carbon Replacement media kits make it easy to replace the media in your tank. Includes the specified amount of media, required gravel, as well as a funnel to...

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.

Standard 150 GPD reverse osmosis membrane will fit all standard reverse osmosis systems, but produce water 2-3 times faster than the typical membrane used in most RO systems. If upgrading from a membrane with a different daily production rate, you must...

Replacement Injector Body Fleck part #13163 Body ONLY, no other part included Replacement injector body for Fleck 5600 series valves. Does NOT inculde injectors, flow controls, or other components. If the injector body is the only damaged part you can...

Replacement Brine Piston Fits Fleck 7000, 5810, & 5812 Valves Fleck Part #60016-01 This a replacement brine piston for the Fleck 7000, 5810, and 5812 series control valves. Possible solution for problems such as: -Water continually filling the...