Description
Used for water supplies with high salts, high TDS with built in pump and auto flush!
5-stage system with a 50 GPD membrane and 5 filter stages blocks high sediment contamination. This 5-stage model is designed to ensure water quality, membrane performance and filter life where the incoming water contains a high amount of sediment as in some well water systems. An extra pre-filter stage is added before the membrane. This design can also be used to extend time between filter changes.
The booster pump is placed after the 3rd pre-filter in the 5-stage configuration. Systems with pump and AutoFlush option can be configured for water up to 4000 TDS.
High Volume Certified Systems
Standard Features on Booster Pump models
-
Auto shut-off valve (conserves water)
-
Flow restrictor – modified capillary
-
Long reach, non-airgap chrome faucet
-
Feed water connector – threaded inlet adapter with metal ballvalve
-
Drain connection included
-
1/4 inch flexible polyethylene tubing with Quick Connect fittings
-
24 VDC booster pump and tank pressure switch
- Has autoflush to prolong the life of the RO membrane
Autoflush
The autoflush prolongs the life of the RO membrane, especially in areas with high TDS, sediment load and hardness. Each time the pump turns on, the autoflush valve opens to permit full flow to the drain for 20-seconds, flushing the inside of the membrane of any built up contaminants. This reduces plugging of the membrane and ensures efficient rejection of TDS for a longer time.
For use in low water pressure situations. Use when the water pressure is below 40-psi, when the TDS is high or when more water is needed. The booster pump creates a pressure of 80 psi to run the RO membrane at peak efficiency. It is placed after the first stage sediment filter to reduce wear from sediment. A pressure switch located on the line to the storage tank turns the pump ON when the tank pressure is 25-psi and OFF when the tank pressure is 40-psi. The pump motor transformer plugs into a standard 110-volt outlet.
5-stage Combines the IAPMO Certified PT-505 system with a booster pump. The booster pump is placed after the 3rd pre-filter in the 5-stage configuration. Systems with pump and AutoFlush option can be configured for water up to 4000 TDS.
Comes complete and ready to install with dispensing faucet and instruction manual.
