Iron Pro 1.5 cubic Foot (48k) On Demand Whole Home Water Softener with Fine Mesh Resin, Pentair tank

• Fine mesh resin for softening and low level iron removal (up to 6ppm)
• Choice of tank color and connection size
• Complete system with Fleck 5600SXT Digital Metered Valve, bypass, brine tank, and installation instructions
• One and a half cubic foot system for average homes with moderate hardness, max capacity 48,000 grains (48k)
• Included booklet covers setup, installation and programming, with images and access to videos so most people can install the system on their own
• Service flow: 6.5 GPM
• Peak flow: 9.8 GPM
• Flow required for backwash: 2.7 GPM

High quality, whole home Iron Pro water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration with the Fleck 5600SXT offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.

Main resin tank is approximately 10" x 54" (approximately 62" overall height with control head). Brine tank is approximately 14"x14"x36" tall, both tanks will be in the selected color. Capable of removing up to 6 ppm of ferrous iron without additional systems required. If ferric iron or higher levels of iron are present a separate iron filter is recommended. System comes with 1.5 cubic feet of resin capable of removing a maximum of 48,000 grains (48k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).