Description
Product Features
12-inch resin tank
Riser tube with distributor basket
2 cubic feet fine mesh resin
10 lb KDF85
Fleck 2510SXT Digital Metered Control Head
Choice of connection
Larger Round Brine Tank with Safety Float
Flow meter measures water and regenerates based on water use, not time, conserving salt and water
Contains 2 cubic feet of fine resin capable of removing up to 64,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles
Designed to remove hydrogen sulfide (rotten egg odor), chlorine, and a wide range of heavy metals, chlorine
Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm
Treats a maximum flow rate of 16 gallons per minute
Ion exchange process physically removes the ions that cause hard water
Specially designed resin traps iron and manganense as well as the hardness
KDF85 treats low levels of hydrogen sulfide, the cause of rotten egg odor in water
Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes
Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.
Maximum efficiency & longevity and minimal maintenance with simple LCD display and touchpad controls for user friendly control
Durable, high quality polyglass tank made by a trusted name in tank manufacturing
Used for holding salt used during the regeneration process. Measures approximately 18-inchx33-inch and holds approximately 300 lbs of salt
Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.
Product Description
Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry.
Iron causes rust buildup that causes appliances, fixtures, clothes, and even hair to turn a red-orange color. Manganese causes a black slime buildup, usually seen in toilet tanks and other areas where water is allowed to stand. Hydrogen sulfide (sulfur) is a common contaminant detectable by a noticable -inchrotten egg-inch odor
Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Standard softening resin will only remove a small amount of clear water (ferrous) iron only. Fine mesh resin improves that capacity to a moderate level (8 ppm or less) of both clear water and red water (ferric) iron. Adding KDF85 media allows it to treat hydrogen sulfide (sulfur) as well as chlorine and heavy metals
Controlled by the digital Fleck 2510SXT, efficiency and control come together in a user friendly interface. On demand regeneration keeps up with high demands and conserves water and salt when demand is low. This results in consistent treatment and higher efficiency. The 2510SXT controller is one of the best residential controllers from Fleck. It has a dual-motor design, compared to the single-motor design used in the 5600 valves. This results in less maintenance, stronger piston movement, and a longer lasting valve. These valves have an outstanding 5 year warranty and have been tested to run continuously for many years! In addition, the SXT controller offers some great features, including a backlit LCD display, touchpad controls, 48 hour internal power backup, and a user friendly interface.
The durable polyglass resin tank is manufactured by Structural USA and is backed by a 10 year warranty. The simple design allows for installation almost anywhere without being unsightly. NOTE: Tank color may vary from the one shown
This system comes complete with a brine tank that includes a float assembly for added reliability and peace of mind. Capable of holding up to 250 lb of salt, the large capacity of this brine tank requires infrequent addition of salt and reduces maintenance. NOTE: Color and design may vary from the system pictured
Simple connections and simple set up make this system great for DIYers. Detailed online installation instructions offer a step-by-step guide on proper installation and set up of the system on installation
Please Note: 12” tanks are shipped in either the 48” height or 52” height, depending on availability. If you have a specific requirement please add it to your notes when checking out and we will do our best to accommodate you.
