Replacement Parts, Resin, & Media

The triple canister big blue bracket is a heavy duty steel bracket that is powder coated white for a durable, long lasting product. The bracket is designed to be used with both the 10" and 20" 3 stage Big Blue housings and features slots to allow for...

220v Transformer for Aquatec CDP 8800 Product Features Transformer Only Aquatec 220v transformer for replacement or custom building 220v Transformer Uses standard 2-prong plug to provide power to CDP 8800 pump For CDP 8800 Powers CDP 8800 Pump OEM...

220v Transformer for Aquatec CDP 6800 Product Features Transformer Only Aquatec 220v transformer for replacement or custom building 220v Transformer Uses standard 2-prong plug to provide power to CDP 6800 pump For CDP 6800 Powers CDP 6800 Pump OEM...

Almond FinishNon Air GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/16-1/2 inch mounting hole Non Air Gap Single line connection for non air gap installation. Does NOT include...

Color changing mixed bed DI resin for removal of 99.9% of all contaminants Product Features DI Resin For removal of 99.9% of all contaminants from water Color Changing Resin Color-changing resin helps to indicate when it is time to be replaced 1...

Noryl® 4" Tank Opening In/Out Head with 1.5" O-ring Distributor Opening and 1-1/2" Threaded Female Inlet and Outlet For use with large tanks that have 4" opening 1.5" female inlet/outlet connections 1.5" O-ring distributor opening  In/Out Tank...

This kit includes 10ft of 1/2" ID clear drain line (5/8" OD), stainless steel hose clamp, and a roll of teflon tape. The stainless steel hose clamp is used to secure the drain line on the barbed drain fitting on the Fleck control head. Teflon tape is...

Acid Neutralizer Domehole Funnel Heavy duty construction Media loading funnel designed specifically for Pentair dome hole tanks. Made in the USA

O-Ring V3180 used with Clack WS1Top of tank to Valve (WS1 & 1.25) o-ring. Also works for the in and out head 1190 Clack D1220, new part number D1400. CH-IO-1190-FP Dimensions = 3 3/8" O.D. x 3" I.D. x 3/16" thickness

**SET OF TWO** Used with Clack valve meter turbine and the adapter tail sets. 

Clack WS1 Blue Injector Assembly for 12" DownFlow or 14" UpFlow Tank Diameter Clack WS1 and 1.25 Injector Assembly with o-rings.   Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made to...

Clack WS1 White Injector Assembly for 10" DownFlow or 13" UpFlow Tank Diameter.  Clack WS1 and 1.25 Injector Assembly with o rings.Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made to...

Clack WS1 Red Injector Assembly for 9" DownFlow or 12" UpFlow Tank Diameter Clack WS1 and 1.25 Injector Assemblies with o-rings. Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made...

C-Series WS1 Meter Assembly

10-inch x 54-inch mineral and resin tank with dome loading port commonly used for 1.5 cubic foot pH filters Product Features 13-inch x 54-inch 13-inch x 54-inch tank is commonly used on 2.5 cubic foot air injection systems, 2.5 cubic feet filtering...