Description
To inquire about this product, please reach out to us at support@afwfilters.com or 785-661-2241
- Fine mesh resin for softening and low level iron removal (up to 6ppm)
- Choice of tank color and connection size
- Complete system with Digital Metered Valve, bypass, and brine tank
- Two cubic foot system for larger homes or higher hardness, max capacity 80,000 grains (80k)
- Included booklet covers setup, installation and programming, with images and access to videos so most people can install the system on their own
- Service flow: 11 GPM
- Peak flow: 16 GPM
- Flow required for backwash: 4.5 GPM
High quality, whole home water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Match the size to your plumbing for simpler installation.
Main resin tank is approximately 13" in diameter. Brine tank is approximately 18" in diameter by 33" tall, both tanks will be in the selected color. Capable of removing up to 6 ppm of ferrous iron without additional systems required. If ferric iron or higher levels of iron are present, a separate iron filter is recommended. System comes with 2.5 cubic feet of fine mesh resin capable of removing a maximum of 80,000 grains (80k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).