Description
- Fine mesh resin for softening and low level iron removal (up to 6ppm)
- Choice of tank color and connection size
- Complete system with Fleck 5600 time clock, bypass, brine tank, and installation instructions
- One cubic foot system for small homes with low hardness, max capacity 32,000 grains (32k)
- Included booklet covers setup, and installation, with images and access to videos so most people can install the system on their own
- Service flow: 5 GPM
- Peak flow: 7.5 GPM
- Flow required for backwash: 2.2 GPM
High quality, whole home Iron Pro water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. The 5600 time clock valve allows you to set it to regenerated based on number of days. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.
Main resin tank is approximately 9" x 48" (approximately 56" overall height with control head). Brine tank is approximately 14"x14"x36" tall, both tanks will be in the selected color. Capable of removing up to 6 ppm of ferrous iron without additional systems required. If ferric iron or higher levels of iron are present a separate iron filter is recommended. System comes with 1 cubic foot of resin capable of removing a maximum of 32,000 grains (32k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).
