Description
Product Features
Mounting Bracket
Housing with 1" In/Out
Housing Wrench
Activated Alumina Filter (5µ)
Designed for homes with 2-4 bathrooms and 6-8 GPM of flow rate
4.5" diameter Big Blue filters outperform standard 2.5" filters
Filter will typically last 6-12 months depending on contaminant levels and amount of water used
Removes lower levels of lead, arsenic, and fluoride from your water without adding any harmful chemicals or substances to the water.
Large NPT connection for minimal flow restriction
Provides simple pressure let off to reduce water spray when changing filters
Simple in/out connection and installation instructions allow most home owners to install these systems on their own
Product Description
Simple single canister carbon filters is capable of removing chlorine, pesticides, herbicides, organics, MTBE, and THM. It also removes most other chemicals, tastes and odors, and is an excellent system for improving water quality.
Single stage system provides safer, cleaner water, without electricity or waste water. Complete system includes 1" NPT inlet/outlet filter housing with pressure relief valve, mounting bracket, filter, and filter housing wrench.
High Flow "Big Blue" Filter - Larger 4.5" diameter filter provide more surface area and fewer flow restrictions than standard sized filters, allowing for higher service flow rates.
DIY Installation - We provide detailed installation instructions that allow most homeowners to install this system themselves. All it takes is some basic plumbing skills and some common knowledge! If you don't feel confident installing it yourself most plumbers can install it in about 1-2 hours.
More Info
1 Review
-
Big filter for little job
I bought this filter because my well water was .001 mg/l over the EPA recommendation. I choose this over a RO unit because I wanted a whole house filtration not just one sink. This thing is BIG! 24" tall and weighs a bit too. It comes with, what looks to be, 1/4" "L" bracket for the wall with attaching hardware the filter to bracket. No matching hardware for bracket to wall unfortunately. I have mine mounted with 3" lag screws going into two pieces of 2x4 for strength. The o-ring seal seems ok but I do have a slight drip. The instructions do not indicate that the threaded inlet & outlet are 1", although it is stated on the website. I did use a threaded reducer on 3/4" compression fittings for ease of installation. Overall the build quality seems very sturdy, the filter life span is 6-12 months nominal which is nice due to how much they cost to replace. The only thing I would recommend to the company is include a indication, gauge or flashing signal, for a dirty filter like my GE water filter has.
