Fleck / Pentair Controls & Parts

Replacement brine tank shut off assembly with float and air check for most common brine tanks. Product Features Complete Float Assembly Includes brine safety valve, float, and air check with 3/8-inch quick connect fitting 3/8" Quick...

Genuine Fleck part #10229 Replacement gasket for injector cap Replacement injector cap gasket for the Fleck 2510 and 2510SXT valves.

Fleck 2310 brine tank safety shut off valve with 3/8" brine line and pick-up tube connections. Does not include the float assembly. Fleck part# 60014. Product Features 2310 Safety Brine Valve Fleck 2310 safety brine tank valve prevents overfilling of...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

The Top Distributor Basket is a bayonet-style twist-on basket for Fleck 7000 control valve that fits the larger 32mm distributor tube. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product Features...

Adapter base for Fleck 2510 control head (Fleck part# 19322). The adapter base threads are 2.5-inch and fit standard mineral tanks. This is the adapter base only and doesn't include the base seal, clamp, slip ring, or any o-rings (see "Related Products"...

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.

Replacement Injector Body Fleck part #13163 Body ONLY, no other part included Replacement injector body for Fleck 5600 series valves. Does NOT inculde injectors, flow controls, or other components. If the injector body is the only damaged part you can...

Replacement Brine Piston Fits Fleck 7000, 5810, & 5812 Valves Fleck Part #60016-01 This a replacement brine piston for the Fleck 7000, 5810, and 5812 series control valves. Possible solution for problems such as: -Water continually filling the...

Brine line flow control (BLFC) button 0.5 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12095

Overflow Fitting With Nut attaches to the side of the brine tank. This fitting allows you to attach a drain hose (1/2" ID) to a floor drain to divert the water should the salt tank start to over fill.

1/2-inch male thread 1/2-inch barbed Common drain fitting for Fleck Straight barbed fitting uses standard 1/2-inch male threads and has a barbed connection for 1/2-inch inner diameter tubing. Commonly used on Fleck control heads for the drain...

Drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves. Holds drain line flow control button in place. O-ring included.

Transformer Fleck Electronic 24 volt 19674 ( newer PN 44147 ) for Fleck 24v Timer Motors as well as Models SXT and SE.24 volt 60 hz 400 ma. with wiring.    This is the transformer provided by Fleck with their electronic valves.

Fleck Part #60015-00 Replacement downflow piston assembly Fits Fleck 5000/Proflo downflow valves Replacement piston assembly for Fleck the 5000/Proflo downflow valves. The downflow valve is the most common.