Fleck / Pentair Controls & Parts

Brine Fitting (B.L.F.C. ) assembly for Fleck 1650 brine system (common on Fleck 2510, 2750, and 2850 valves). Housing (17907), BLFC Button ( 0.25 gpm - 12818, 0.50 gpm - 12095 OR 1.0 gpm - 12097) and BLFC Retainer (12098) included.   Discontinued by...

Drain line flow control (DLFC) button 2.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12087

Seal and spacer kit for the Fleck 5000 and Proflo. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes 5 Seals, 4 regular Spacers, and 1 special End Spacer (the end spacer goes in first, flat side...

Fleck 1-1/4" Kit 5810/12 Connectors, NPT Fleck 1-1/4" Kit 5810/12 Connectors, NPT

Hot water seal and spacer kit for the Fleck 5600 & 4650 valves. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part#...

Main gear & shaft for the Fleck 5600 control head (Fleck part# 13170). This is typically the only gear that may break or wear out. DISCONTINUED BY MANUFACTURER. Limited availability. Part available in the following kits: 62089-03, 62089-09,...

1/2-inch male thread 1/2-inch barbed elbow Common drain fitting for Fleck Elbow barbed fitting uses standard 1/2-inch male threads and has a barbed connection for 1/2-inch inner diameter tubing. Commonly used on Fleck control heads for the drain...

Main gear & shaft for downflow digital Fleck valves - 5600SE, 5600SXT 6600, 6700 Genuine Fleck part #42933 This is the main gear and shaft that moves the piston and brine cam. If the motor is running fine and the other gears are intact but the...

Replacement piston assembly for the Fleck 5600 & 6700 valves. These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-71. Product Features Fleck 5600 & 6700 Digital...

Seal and spacer kit for the Fleck 7000. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part# 61438. Product Features Fleck...

Discontinued by manufacturer, limited availability. Part will be available in the following kit(s) FL62103-02 Cam, Drive 2500, 2510,2700, 2750, 2850, 2900, 2900s Drive Cam -STF BLUE version part # 60160-15Does not include the "roll pin", PN...

Replacement motor for the Fleck 5600SXT & SE control head (Fleck part# 16944). This is also used on the Fleck 6600/6700 valves. This is the 24V, 60Hz motor with 2 RPM. Product Features Replacement MotorDrive motor is used in the Fleck 5600SXT & SE...

Drain line flow control (DLFC) button 4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12091

Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510 Control Valves Product Features Piston Rod Retainer Connects piston rod to main piston Product Description Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510...

Replacement o-ring for use on the Fleck 9100 and 9100SXT 2nd tank adapter yoke assembly. Qty 4 on the crossover pipes.