Fleck / Pentair Controls & Parts

Discontinued by manufacturer, limited availability. Part will be available in the following kit(s) FL62103-02 Cam, Drive 2500, 2510,2700, 2750, 2850, 2900, 2900s Drive Cam -STF BLUE version part # 60160-15Does not include the "roll pin", PN...

Replacement brine piston for the Fleck 2510 valves. Product Features Fleck 2510 Brine Piston Replacement brine piston for the Fleck 2510 softener valve. Genuine Fleck Part This is a genuine Fleck part# 60011 Product Description Replacement brine...

Drain line flow control (DLFC) button 4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12091

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

Lower seal and spacer kit for the Fleck 9000 & 9100 valve. These wear out over time and can cause your control head to leak, work inefficiently, or not work at all. This is the entire lower seal & spacer kit needed to replace your old ones...

13303 - O-ring, Injector Cover

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Discontinued by manufacturer- limited availability  Product Features Meter Cable...

The 1600 Brine Valve Short Stem is commonly used in the Fleck 1500 and 2500 models. The piston assembly (part#60029) should be replaced if the brine refill never stops (valve is stuck).The 1600 (or 3/8" tubing size) valve is normally used on...

Fleck Seal O-Ring

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Brine line flow control (BLFC) button 0.25 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12094

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

Genuine Fleck Part #60425-16 Complete Tube Assembly for 13-16 inch tanks Tube assembly for Fleck 9100 valves on 13-16 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

Fleck 19620-01 Angle Adapter, 3/4" MNPT 90° angle yoke assembly compatible with the Fleck 5600 and Fleck 2510 valves Allows you to mount the bypass valve up or down instead of straight back. Easy to adapt.

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...