Fleck / Pentair Controls & Parts

Stainless steel flow control Product Features Stainless Steel Heavy duty fitting Flow Control Limits water flow for drain lines or other water lines Product Description Commonly used with the brass drain fitting on the Fleck 2510 as a drain line...

Fleck water softener air check (does not include bobber part 60068-30 or safety valve part 60014) This is the piece on the float assembly in the brine tank (grey long tube with air check on bottom) 3/8" X 34" (may receive 48" depending on stock, can be...

Cover for Fleck 5600 Valve with "L"-style bracket Offers additional protection for the head This cover for the Fleck 5600 Valve with "L"-style bracket slides down over the valve to offer additional protection from the elements. This cover is...

0.50 gpm Brass Brine Line Flow Control (BLFC) Assembly 1600 (PN 60020-50) Used on Brine Valve Piston Assembly (60029) of the Fleck 1500, 2500, and 3600 water softeners.Oldest part number found in some manuals reference it as 12747 with label,...

The 1600 Brine Valve Short Stem is commonly used in the Fleck 1500 and 2500 models. The piston assembly (part#60029) should be replaced if the brine refill never stops (valve is stuck).The 1600 (or 3/8" tubing size) valve is normally used on...

Seals ( 6 of 16101 ) and Spacers ( 5 of 16638-01 ) for the Fleck 2850 Valve.

Fleck Meter Cable 100" (8.3 FT) For Stainless Steel Meter

Extended flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Product Features Meter Cable for Paddlewheel Meter Replaces cables that are no...

Fleck (40538) 32 mm O-Ring Distributor Retainer

Brine Line Flow Control .125 BLFC Button PN 17307

Main gear & shaft for the Fleck 5600 control head (Fleck part# 13170). This is typically the only gear that may break or wear out. Product Features Idler Gear   Fleck Part# 13017 This is a genuine Fleck part and is part# 13017 Product...

18" flex line with 3/4" quick connect and 1" female threads

Float for Assembly, 2310, on a 30" Rod part number 60068-30NOTE: This is only the Float assembly which includes the float, 30" tube and grommets, and does NOT include Safety Brine Valve (60014) or the actual pick up tube with air check (60002)Float rod...

Stainless 18" Corrugated Flexible Connector 1" FIPT x 1" Quick Connect   Features: Mega-Flow Super water-flex  304 series stainless steel  Push-to-connect john guest fitting  Installs onto pipe of...

BLFC Assembly PN 61450-50 ( 0.50 gpm button included )used on Fleck 7000 Valve (and Fleck 5810, 5812)Includes plastic 3/8" fitting, 0.50 gpm BLFC button, BLFC retainer, and o-ring 13302. NO Clip (40946). That is sold separately.