Description
Product Features
For removal of Arsenic +3 and +5 from water supplies.
Media is rated for 8.0 GPM service flow for 2.75 cu. ft.
Requires 7 GPM for backwash
Media removes arsenic +5 AND +3 equally well without the need of prior water treatment for oxidation of arsenic +3.
Bayoxide E33 arsenic media is rated at treating up to 100 ppb of arsenic with 95%-98% removal. Levels above this can be removed, but media life and effective removal rates may be lessened.
With arsenic levels less than 100 ppb, the media will typically last 2-3 years before effluent arsenic levels exceed 10 ppb.
Bayoxide® E33 is a registered trademark of LANXESS Deutschland GmbH
Product Description
This media provides removal of As+5 AND As+3 in most applications. Arsenic levels up to 100 ppb can be treated with 95%-98% effectiveness. Amount of media needed for a stand-alone system can be determined by tank size.
12"x48" Tank - 2 cubic feet
13"x54" Tank - 2.7 cubic feet
More Info
| Operation Conditions | Physical Properties | |||
| Service Flow | 3.0 GPM/cubic feet | Color | Reddish brown | |
| Mesh Size | 16 to 50 | Physical Form | Sperical beads | |
| Backwash Rate | 2.8 GPM/cubic feet | Bulk Density | 55 lb/cubic feet | |
| Bed Depth | 24" | |||
| Standard Package | 2.0 cubic foot pail (110 lbs) | |||
| Life Expectancy | ||||
| Typical Results | 2-3 years average dependent on contaminant levels, backwash flow rates, and backwash frequency | |||
Service flow rate is the manufacturers recommendation for maximum contaminant removal at a constant flow for media alone. Intermittent flow rate and/or lower contaminant levels MAY allow higher treatment flow rates.
Backwash Flow Rates
The backwash flow rate is the minimum rate that MUST be available to ensure proper backwashing and adequate media life. While lower flows can be used and MAY provide adequate results, media life may be significantly reduced.
