Commercial 2", 2900 and 2900s Valve Lower Seal Spacer Kit.*** Includes 4 Seals (PN 11720), and 2 Spacers (10369) and 1 large black Spacer (14753)Top part of 2900 Valve uses the Fleck Seals and Spacers 60121 models before 2005After 2005, it is likely...

Discontinued by manufacturer Fleck Part #: 60103 Lower hard water bypass piston assembly for 2900 (2900S separate source regen) Fits the following Fleck valves: 2900 2900S

Experience unparalleled water purification with the Slimline 2.5-inch by 20-inch Bone Char Carbon Filter, designed to significantly improve the quality of your drinking water. This powerful filter reduces or removes harmful contaminants such as fluoride,...

2.5" mounting clip Fits standard membrane housings Fits larger 2.5" inline filters Single 2.5" mounting clip has single mounting hole approximately 3/16". Fits standard membrane housings and 2.5" inline filters.

PURTEST PT 20 UV 35 in "L, 1 in Size, UV Disinfection Unit, 20 gpm   Product Details UV Disinfection Unit, Size 1 In., MIP Connection, Flow (GPM) 20, Max. Hardness 7, Max. Iron 0.3, Max. Manganese 0.05, Suspended Solids 5 NTU, Voltage 120, Lamp...

Preloaded 12-inch x 48-inch tank for easy replacement 10% resin  Standard tank opening with 1-inch riser fits most control heads Includes tank, 2 cu ft 10% resin, riser with distributor basket Preloaded replacement resin tank makes changing your...

Preloaded 12-inch x 48-inch tank for easy replacement High capacity resin for low cost softening Standard tank opening with 1-inch riser fits most control heads Includes tank, 2 cu ft high capacity resin, riser with distributor basket Preloaded...

PISTON ROD only, Fleck 5600, PN 13001.

1.5 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 8" diameter resin tanks.

DLFC Button 15 gpm Fleck 1 inch button 16736

DLFC Button 10 gpm Fleck 16529 Drain Line Flow Control ( DLFC ).

FL40947-02 Injector Plug Assy, w/ O-Ring' O-Ring Included. This plug is designed for use with the Fleck 5600, 7000, 9000, 9100 valves, for converting a softener into a filter. Replaces P/N FL13857

Fleck (40538) 32 mm O-Ring Distributor Retainer

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...

0.5 cubic foot KL Katalox Light Media  For removal of iron and manganese Removes up to 10 ppm iron  Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or...