Fleck 7000 Series

"H" clip for Fleck 7000 Control Valve and new Structural CT tanks DISCONTINUED BY MANUFACTURER. LIMITED AVAILABILITY.  Product Features Retaining Clip Replacement clip for bypass valve, connections, and brine cap Fleck 7000 & Structural...

The diffuser basket installs on the distributor tube directly underneath the control head to diffuse water through the air pocket that is injected into the tank during the backwash cycle, enhancing the oxidation of contaminants in the water. It just...

Riser Tube 1.050" x 54" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media.

Rebuild kit for the Fleck 7000 filter valve. Kit includes piston assembly (Fleck part# 61452-20) and the seal & spacer kit (Fleck part# 61438). For the Fleck 7000 softener valve rebuild kit, see FP-7000RBKS. Product Features Fleck 7000...

The 32mm Fleck bottom distributor basket (40924) is a very durable distributor basket that allows exceptional flows, while utilizing smaller slits. The bottom distributor basket works great for water softeners, iron filters, carbon filters, sediment...

Rebuild kit for the Fleck 7000 filter valve. Kit includes piston assembly (Fleck part# 61453-10), seal & spacer kit (Fleck part# 61438), and brine valve (Fleck part# 60016-01). For the Fleck 7000 filter valve rebuild kit, see FP-7000RBKF...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

The Top Distributor Basket is a bayonet-style twist-on basket for Fleck 7000 control valve that fits the larger 32mm distributor tube. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product Features...

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to connect to 3/8" Poly Brine Line. For use in 28" Brine Wells for 11" x 38", 15" x 17" x 36" and 18" x 33" Brine Tanks. **If you need to...

Replacement Brine Piston Fits Fleck 7000, 5810, & 5812 Valves Fleck Part #60016-01 This a replacement brine piston for the Fleck 7000, 5810, and 5812 series control valves. Possible solution for problems such as:-Water continually filling the brine...

Replacement piston for the Fleck 7000 filter piston. Fleck part# 61452-20 Product Features Fleck 7000 Filter Piston Replacement piston for the Fleck 7000 filter valve. Fleck Parts Genuine Fleck part# 61452-20 Product Description Replacement...

32mm distributor adapter reduces distributor opening in control head from 32mm to 1.05" to accept smaller distributor tubes. Commonly used with the Fleck 7000 & 9100 valves Product Features Distributor AdapterReduces the distributor opening on control...

Seal and spacer kit for the Fleck 7000. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part# 61438. Product Features Fleck...

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...