Fleck / Pentair Controls & Parts

Rebuild kit for the Fleck 5600 softener valve. Kit includes piston assembly (Fleck part# 60102-00), seal and spacer kit (Fleck part# 60125), and brine valve piston assembly (Fleck part# 60032). For the Fleck 5600 filter valve rebuild kit, see...

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to connect to 3/8" Poly Brine Line. For use in 28" Brine Wells for 11" x 38", 15" x 17" x 36" and 18" x 33" Brine Tanks. **If you need to...

Genuine Fleck part #14805 Replacement gasket for injector body Replacement injector body gasket for the Fleck 2510 and 2510SXT valves.

Drain line flow control (DLFC) button 2.4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12088

Check valve air draw for 5600SXT air injection valve

Replacement brine injector drain assembly for the Fleck 5600 and 5600SXT valves. Product Features Replacement Brine/Drain Assembly Contains all parts to replace the entire assembly 12638 - O-ring, Drain 13301 - O-ring, Injector 13302 - O-ring,...

Valve body for Fleck 2510. Fleck part 19328. **NOTE: Does not include any o-rings or seals. These are sold separately.

Rebuild kit for the Fleck 5600SXT filter valve. Kit includes piston assembly (Fleck part# 60102-71) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600SXT digital softener valve rebuild kit, see FP-56SXT-RBKS. Product Features Fleck...

Part #44144 For 2510, 2750, 2850, 2900, 3150, and 3900 valves with 24v motor Input: 120V 50/50Hz 15W 1.66 Amps Replacement transformer for valves with 24V motor.

Clamp ring assembly for Fleck 2510 control valve (Fleck part# 60503). Includes both clamp arms (Fleck parts# 19899 & 19900), hinge pin (Fleck part# 40000), pivot (Fleck part# 19998), and the screw & comb hardware (Fleck part# 40057). Product Features...

Drain line flow control (DLFC) button 3.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12089

32mm distributor adapter reduces distributor opening in control head from 32mm to 1.05" to accept smaller distributor tubes. Commonly used with the Fleck 7000 & 9100 valves Product Features Distributor AdapterReduces the distributor opening on control...

Rebuild kit for the Fleck 5600 filter valve. Kit includes piston assembly (Fleck part# 60102-10) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600 softener valve rebuild kit, see FP-5600RBKS. Product Features Fleck 5600 Rebuild...

Paddlewheel flow meter assembly for digital SE/SXT Fleck 2510, 5600, 9000, and 9100 softener valves. Includes screws, clips, O-rings and flow straightener. Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all digital...

Five o-rings used on the Fleck 5600 Injector Body Drain Module.13303, 13302, 12638, and two of 13301