Fleck / Pentair Controls & Parts

Cover for Fleck 5600 Valve with "L"-style bracket Offers additional protection for the head This cover for the Fleck 5600 Valve with "L"-style bracket slides down over the valve to offer additional protection from the elements. This cover is...

Fleck 19620-01 Angle Adapter, 3/4" MNPT 90° angle yoke assembly compatible with the Fleck 5600 and Fleck 2510 valves Allows you to mount the bypass valve up or down instead of straight back. Easy to adapt.

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

Replacement piston assembly for the Fleck 5600 mechanical filter valves. The piston wears out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-10. Product Features Fleck 5600...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

Replacement piston for the Fleck 9000 & 9100 softener valves (UPPER only). These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60400. Product Features Fleck 9000 & 9100...

Fleck 1" Kit 5810 and 5812 Connectors, PVC NPT, Set of Two.

1.0 gpm BLFC Button used in Fleck Valves to regulate the refill rate during Brine Refill.

Fleck Brine Line Flow Control 3/8" .25 Gallons Per Minute used on 7000, 5810, and 5812 valves

1.5 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 8" diameter resin tanks.

Tube for 1600 and 1650 Brine Valve Piston Assembly on fleck 2510 Valve, with out Nuts, Ferrules, or Inserts.

1600 Injector Assembly Fleck - 60080-01 for the Fleck valves using 3/8" brine tubing. Includes # 1 (white) Injector Nozzle & Throat, screen (10227), 2 gaskets (10229, 11475), brass elbow (10328), 2 screws and top cap. # 1, White, used on 8" to 10"...

Micro Switch used to control drive motor and "ride" the CAM.Used on several models of Fleck Valves. (old # V7-6B19D8 and new # d3V-16-1C26-K)2500, 2510, 2750, 2850, 2900, and 9000 / 9100 / 9500. (also used ( 2 of them ) inside front cover of Fleck...

Replacement Valve Body Fleck part #61400-12 Body ONLY, no other parts included Replacement valve body for Fleck 5600 series.Valve body ONLY, does not includes any seals, spacers, O-rings, injectors, etc. If the  valve body is the only damaged...