Description
- FILTER Valve with NXT controller
- Lead-free brass valve body
- 1.5-inch connections
- Maximum backwash of 47 GPM
- Service flow rate up to 46 GPM (15 psi drop)
- Peak flow rate up to 60 GPM (25 psi drop)
- Cv flow rate up to 12 GPM (1 psi drop)
- Fully adjustable 3-cycle control
- Standard 1.9" distributor pilot
- Standard 4"-8 UN mounting base
The Fleck 2850NXT filter valve is a commercial valve designed large systems with high flow rate requirements. This is a replacement control head for use on a filter system, it DOES NOT offer the brine capabilities required for a softener. The NXT digital controller provides advanced controls over individual cycles.
| Valve Specifications | Dimensions | |||
| Valve Material | Lead-free brass* | Distributor Pilot | 1.9" O.D. | |
| Inlet/Outlet | 1-1/2" NPTF/BSPF | Dain Line | 1" NPTM | |
| Cycles | 3 | Mounting Base | 4"—8 UN | |
| Flow Rates (50 PSI Inlet) - Valve Alone | Height from Top of Tank | 6.5" | ||
| Continuous (15 psi drop) | 44 GPM | Riser Tube Diameter | 1-1/2" | |
| Peak (25 psi drop) | 60 GPM | Riser Height | 1/4" Below top of tank | |
| Cv (flow at 1 psi) | 12 | Typical Applications | ||
| Max Backwash (25 psi) | 47 GPM | Filters | 14 - 30" diamter (based on 10GPM/ft²) | |
| Regeneration | Additional Information | |||
| Downflow/Upflow | Downflow only | Electrical Rating | 110V 60Hz | |
| Adjustable Cycles | Yes | Estimated Shipping Weight | 7 lbs | |
| Electromechanical Timer | 0 - 240 min/cycle | Working Pressure | 20 - 125 psi | |
| Temperature | 34 - 110°F | |||
