Tanks

The Top Distributor Basket is a twist on style for Fleck, Clack, and Autotrol valves that fits a standard riser tube of 1.05" diameter. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product...

The riser tube with standard mesh basket measures 1.05" in diameter and is 54" long. It can be cut shorter to whatever length you need and works with most control valves (please check the diameter of your riser tube before purchasing to ensure that it...

The tank funnel makes filling your resin and mineral tanks much quicker, easier, and cleaner. This funnel can also be used to refill most 2.5-inch diameter and 4.5-inch diameter cartridges. The 10-inch opening narrows down to 2.5-inch and is constructed...

This 4.0 gallon stainless steel pressurized RO storage tank has a 3.2 gallon draw and is the common size used with most reverse osmosis systems. The tank can be used in an upright or horizontal position and meaures 15" tall by 11" in diameter. Product...

10-inch x 54-inch mineral and resin tank for use with backwashing filters, upflow filters, water softeners, and salt-free water conditioners. Commonly used for 1.0 cubic foot air injection systems, 1.5 cubic feet filtering systems, 48K water softeners,...

The diffuser basket installs on the distributor tube directly underneath the control head to diffuse water through the air pocket that is injected into the tank during the backwash cycle, enhancing the oxidation of contaminants in the water. It just...

The riser tube with standard mesh basket measures 1.05" in diameter and is 54" long. It can be cut shorter to whatever length you need and works with most control valves (please check the diameter of your riser tube before purchasing to ensure that it...

Replacement nut kit for 1650 brine and 2310 float. Product Features Replacement Nut KitIncludes black plastic nut, black gripper nut, and white sleeve Genuine Fleck PartThis contains genuine Fleck part 60900-40 Product Description Replacement nut kit...

8-inch x 44-inch mineral and resin tank for use with backwashing filters, upflow filters, water softeners, and salt-free water conditioners. Commonly used on 0.5 to .75 cubic feet filtering systems, 24K water softeners, and low-flow salt free...

Bobber for H474 Float Assembly Replacement bobber for the H474 float assembly. Simple clip in mechanism for easy installation.

Upper Basket - Upper basket installs on the bottom of many Fleck, Clack, and Autotrol control valves to help prevent media getting pushed into plumbing due to pressure bursts and incorrect plumbing Fine Mesh - Smaller slits allow for use with fine mesh...

Tank adapter bushing for use with mineral and resin tanks with 4-inch openings. The bushing is necessary so that the tanks can accept standard control heads with 2.5-inch bases. Product Features Adapter Bushing Reduces tank opening from 4-inch to 2...

A unique system with 2 built in mixing chambers and 2 swirl chambers that reduces a drop of water to hundreds of micro bubbles, allowing the chemical to mix and react 5 times faster than a standard retention tank. Product Features Advanced...

15 gallon chemical tank used for soda ash, chlorine, and hydrogen peroxide injection. Product Features 15 Gallon Tank Chemical tank used with chemical injection systems, including soda ash, chlorine, and hydrogen peroxide. Rugged polyethylene...

Standard Square Brine Tank Includes 4" Brine Well, Safety Float, and Air Check Standard Black Color Holds approximately 150 lb of salt Measures 11"x11"x36" Standard square brine tank used with Fleck control valves. Approximately 11"x11"x36" and...