Preloaded 12-inch x 48-inch tank for easy replacement High capacity resin for low cost softening Standard tank opening with 1-inch riser fits most control heads Includes tank, 2 cu ft high capacity resin, riser with distributor basket Preloaded...

PISTON ROD only, Fleck 5600, PN 13001.

1.5 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 8" diameter resin tanks.

DLFC Button 15 gpm Fleck 1 inch button 16736

DLFC Button 12 gpm Fleck 1 inch button 16735.

DLFC Button 10 gpm Fleck 16529 Drain Line Flow Control ( DLFC ).

FL40947-02 Injector Plug Assy, w/ O-Ring' O-Ring Included. This plug is designed for use with the Fleck 5600, 7000, 9000, 9100 valves, for converting a softener into a filter. Replaces P/N FL13857

Fleck (40538) 32 mm O-Ring Distributor Retainer

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...

0.5 cubic foot KL Katalox Light Media  For removal of iron and manganese Removes up to 10 ppm iron  Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved) and ferric (red water or...

Flat Cap - metal for 1600 or 1700 housing PN 11893  Can also replace PN 10228

O-ring -021 PN 18879 now O-ring -124 PN 19054 Used in 1800 Brine System.****Also used on Rotor Fleck 8500 / TwinFlo 100eAnd Fleck 7000 distributor o-ring, internal 32 mm

Curved spring washer used behind the Timer Mounting Plate on Fleck 5600 Valves made before 1998. part #A13299

Fleck Dist. Pilot Ring, 13/16 Fleck Distributor Pilot Ring 13/16

Fleck Seal O-Ring