Clip for use with Fleck turbine meters to connect to control head For turbine meters only. Part 19569

COMPLETE PACKAGE by Abundant Flow Water- Complete package that includes a whole house Water Softener w/ UPGRADED 10% resin & UPGRADED Upflow Catalytic Carbon Filtration System. Our package also includes an installation manual and technical support...

V3193-02 repair wrench can be used with all Clack Water Softeners and Filters Systems It can help remove and tighten pistons, and help install and loosen nuts and fittings on Clack valves

C3005 Clack WS1 Cage Spacer Stack Assembly. If the clack cage has one seal damaged, it will cause the water to continously leak out the drain Genuine part- part number V3005-02 C3005 Clack ws1 Cage Spacer Stack Assembly. With the clack cage if one of...

15V DC Adapter V3186-06 fits Clack valves manufactured in 2017 or newer Is not compatible to systems that were manufactured before 2017 as those system were manufactured with an AC output. You will need and AC adapter for older models OEM Clack...

Replacement circuit board for your WS1 valve Clack V3108 Replacement Circuit Board Interchangeable with older version Clack V3108 Circuit board replacement. Easy replacement, just simply remove harness from old board, and plug in replacement for set up...

Kit contains 3 Clack part #'s for the Clack WS1 Control Valve Contains Downflow Piston V3011 Contains Brine Regenerant Piston V3174 Contains Spacer Stack V3005 This kit replaces the main interior parts of the Clack WS1 water softener/filter control...

Preloaded 12-inch x 48-inch tank for easy replacement Purolite High Capacity resin from a well known resin manufacturer Standard tank opening with 1-inch riser fits most control heads Includes tank, 2 cu ft Purolite High Capacity resin, riser with...

1 cubic foot Purolite C100E resin 9-inch x 48-inch tank Maximum 32,000 grain capacity (32k) Fleck 2510SXT control valve Metered (on-demand) regeneration Long lasting, low maintenance controller Upgraded Purolite C100E resin Complete system with bypass...

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the tank pressure exceeds 40 PSI or the ESO (if applicable)...

LayneRT Arsenic Removal Filter Big Blue 4.5-inch x 20-inch High arsenic removal capacity Minimal flow restriction Standard 4.5-inch x 20-inch filter size Big Blue 20" filter with LayneRT resin offers excellent removal of Arsenic with less flow...

Replacement o-ring for standard sized membrane housing on drinking water RO systems. *Housing not included*   **Some housings have two o rings. 

System Specs Flow Rate- 8 GPM Tank Size- 12" x 48" Compact Footprint- 13"w x 17"d Overall Height- 54" In/out head with bypass valve 2cuft of resin   The PFAS water treatment system uses ResinTech's ion exchange resin that is designed to remove a...

1.5 cubic feet Multi media filter with fine mesh resin, catalytic carbon, and KDF85, controlled by the digital Fleck 5600SXT control head. The fine mesh resin enables the system to soften water as well as remove low to moderate levels of iron (up to...

64,000 grain capacity treats up to 16 gallons per minute with the 1" digital Fleck 2510SXT control head. Water softeners treat hard water to eliminate scale buildup. This eliminates water spotting on dishes, protects pipes and appliances, and reduces...