Fleck 9000 & 9100 Series

Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all mechanical/Econominder Fleck 2510, 5600, 9000, and 9100 softener valves. Complete Includes flow meter, screws, clips, O-rings and flow straightener. (Does...

Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510 Control Valves Product Features Piston Rod Retainer Connects piston rod to main piston Product Description Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510...

Replacement curved front panel assembly includes circuit board for Fleck 5600SXT. Fleck part #61672-0201. Product Features Includes Circuit Board Front panel assembly include circuit board for replacement on 5600SXT heads. Curved Style Replacement...

Drain line flow control (DLFC) button 4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12091

This is a replacement valve for a dual tank softener. The 9100 mechanical twin tank valve connects two water softener tanks for automatically alternating between tanks as needed. The valve is constructed of a very durable fiber-reinforced polymer (see...

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

Lower seal and spacer kit for the Fleck 9000 & 9100 valve. These wear out over time and can cause your control head to leak, work inefficiently, or not work at all. This is the entire lower seal & spacer kit needed to replace your old ones...

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Discontinued by manufacturer- limited availability  Product Features Meter Cable...

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Brine line flow control (BLFC) button 0.25 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12094

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

Genuine Fleck Part #60425-16 Complete Tube Assembly for 13-16 inch tanks Tube assembly for Fleck 9100 valves on 13-16 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

Replacement piston for the Fleck 9000 & 9100 softener valves (UPPER only). These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60400. Product Features Fleck 9000 & 9100...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

This kit includes 10ft of 1/2" ID clear drain line (5/8" OD), stainless steel hose clamp, and a roll of teflon tape. The stainless steel hose clamp is used to secure the drain line on the barbed drain fitting on the Fleck control head. Teflon tape is...