Replacement Parts, Resin, & Media

Curved spring washer used behind the Timer Mounting Plate on Fleck 5600 Valves made before 1998. part #A13299

seal quad ring part no. 10209 used in Fleck 5600, and 2500 piston end plugs.

Fleck 3/4" x 1" Kit 5810/12 Connectors Sweat (Set of 2)

Fleck 5810/12 Elbow Adapter Set  Requires you also use matching Adapter Connectors.NOTE: Not for 5800 valve

Round Brine Tank Includes 4" Brine Well and Safety Float Standard Blue Color Holds approximately 450 lb of salt Measures 18" in diameter, 40" tall Round brine tank used with Autotrol control...

SOFTENER Valve with 12-Day Timer Lead-free brass valve body 1.5-inch connections Maximum backwash of 47 GPM Service flow rate up to 46 GPM (15 psi drop) Peak flow rate up to 60 GPM (25 psi drop) Cv...

FILTER Valve with NXT controller Lead-free brass valve body 1.5-inch connections Maximum backwash of 47 GPM Service flow rate up to 46 GPM (15 psi drop) Peak flow rate up to 60 GPM (25 psi drop) Cv...

Replacement piston assembly for the Fleck 5600 softener valve. The low water piston shortens the backwash time to 7 minutes, rather than the 10 minutes that is standard with the normal piston. These...

We carry a full line of almost ALL replacement Fleck parts for ALL models of Fleck control heads. We are working to get all these parts on our website, but due to the large number of parts available,...

24-inch x 72-inch mineral and resin tank for use with backwashing filters, upflow filters and water softeners. The tank has a 4-inch opening and requires the adapter bushing (see -inchOptions-inch...

Replacement resin and funnel Durable 10% crosslink resin Includes 2.5 cu ft resin Replacement resin kits make it easy to replace the resin in your tank. Includes the specified amount of resin as...