Replacement Parts, Resin, & Media

O-Ring V3180 used with Clack WS1Top of tank to Valve (WS1 & 1.25) o-ring. Also works for the in and out head 1190 Clack D1220, new part number D1400. CH-IO-1190-FP Dimensions = 3 3/8" O.D. x 3" I.D. x 3/16" thickness

Locking Clip for Drain Elbow and Brine Elbow for Clack WS1 Valve

Brine Elbow 3/8" Quick Connect V4144-01 for Clack WS1 and WS1.25

**SET OF TWO** Used with Clack valve meter turbine and the adapter tail sets. 

Clack WS1 Blue Injector Assembly for 12" DownFlow or 14" UpFlow Tank Diameter Clack WS1 and 1.25 Injector Assembly with o-rings.   Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made to...

Clack WS1 White Injector Assembly for 10" DownFlow or 13" UpFlow Tank Diameter.  Clack WS1 and 1.25 Injector Assembly with o rings.Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made to...

Clack WS1 Red Injector Assembly for 9" DownFlow or 12" UpFlow Tank Diameter Clack WS1 and 1.25 Injector Assemblies with o-rings. Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made...

C-Series WS1 Meter Assembly

Rebuild kit for the Fleck 5600SXT filter valve. Kit includes piston assembly (Fleck part# 60102-71) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600SXT digital softener valve rebuild kit, see FP-56SXT-RBKS. Product Features Fleck...

10-inch x 54-inch mineral and resin tank with dome loading port commonly used for 1.5 cubic foot pH filters Product Features 13-inch x 54-inch 13-inch x 54-inch tank is commonly used on 2.5 cubic foot air injection systems, 2.5 cubic feet filtering...

Tank float valve to use in open, vented or atmospheric water storage tanks.  We use these to regulate when your commercial RO system turns on and off. The wiring can be wired to the RO directly or to plug adapter to the wall that you plug the RO...

This is the most commonly used storage tank if you are using a whole house RO system. Your RO produces water to fill the tank, then you use a pump to pressurize your home from this tank. We do have many other sizes available, this is a common size to use...

The SCALA2 is a fully integrated water booster pump that delivers perfect water pressure to all taps. It features a pump, motor, tank, sensor, drive and non-return valve in one compact unit that is installed quickly and easily. With its intelligent pump...

Replacement cable for Fleck 5600 valve, has the ends that you just push firmly into the meter and control head. 6.25" long

Neoprene water softener resin tank jacket ideal for minimizing the common issue with tank sweating when ground water is cold and ambient air is warm and humid. Can also be used on Filter Tanks of the corresponding size. Order the correct size by...