Salt and chemical free Reduced backwash requirements saves water Up to 15 ppm iron Up to 6 ppm hydrogen sulfide Up to 2 ppm manganese 11 GPM recommended peak flow 9 GPM minimum required 13"x54" tank (overall height 62") 2 cubic foot KL media &...

Salt and chemical free Reduced backwash requirements saves water Up to 15 ppm iron Up to 6 ppm hydrogen sulfide Up to 2 ppm manganese 9 GPM recommended peak flow 7 GPM minimum required 12"x52" tank (overall height 60") 1.5 cubic foot KL media &...

Salt and chemical free Reduced backwash requirements saves water Up to 15 ppm iron Up to 6 ppm hydrogen sulfide Up to 2 ppm manganese 6 GPM peak recommended flow 4 GPM minimum required 10"x54" tank (overall height 62") 1 cubic foot KL media & gravel...

Set of 2 filters This is a genuine Sprite® hand held shower filter cartridge for replacing the cartridge in all Sprite® hand held shower filters. This is a pack of two. Filter should be replaced every 3 months.

Fits Pentek big blue housings that hold 4.5" filters Inner diameter ~6 inches Outer diameter ~6.75 inches Replacement filter housing wrench used to help remove filter housings when changing filters on Pentek big blue filter systems.

Standard Square Brine Tank Includes 4" Brine Well and Safety Float Standard Almond Color Holds approximately 275 lb of salt Measures 15"x17"x36" Standard square brine tank used with Autotrol control valves. Approximately 15"x15"x36" and holds...

Inline flow restrictor for reverse osmosis systems Product Features Flow Restrictor Flow restrictor to be used on waste water line of RO systems. This is designed for use with a 75 GPD membrane 1/4" Quick Connect Connects to tubing used on most filter...

The Big Blue 10" GAC filter can be used to replace a current filter or upgrade from the standard carbon block filter. The filter measures 4.5-inch in diameter and 10-inch long and fits all standard 10-inch Big Blue housings. Product...

Drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves. Holds drain line flow control button in place. O-ring included.

Brine line flow control (BLFC) button 0.5 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12095

Brine line flow control (BLFC) button 0.25 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12094

Tool used to remove drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves.

3/8-inch straight stem1/4-inch quick connect Reducing fitting reduces 3/8-inch quick connect fitting down to 1/4-inch quick connect. Commonly used on Aquatec booster pumps. Stem style fitting offers reduce space usage vs inline style fittings.

Oil Rubbed Bronze FinishNon Air GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletCandy Cane SpoutRequires 7/16-1/2 inch mounting hole Non Air Gap Single line connection for non air gap installation. Does NOT...

Brushed Nickel FinishNon Air GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletCandy Cane SpoutRequires 7/16-1/2 inch mounting hole Non Air Gap Single line connection for non air gap installation. Does NOT...