Product Features Aquatec ERP 500 Quieter permeate pump makes less noise for systems rated at 50 GPD or less Reduces Waste Reduces back pressure from the tank, maximizing system efficiency and water purity Non-electric Hydraulically powered,...

The Trojan UV Max 650733R-002 is the replacement power supply kit (also called a controller) that is used to replace the power supply of the Trojan UVMax B4, B4-V, C4, C4-V, D4, D4-V and IHS12/22-D4 systems. Product Features Trojan UVMax B4,...

DISCONTINUED BY MANUFACTURER   Valve body for Fleck 2510. Fleck part 19328. **NOTE: Does not include any o-rings or seals. These are sold separately.

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

Center plug for Fleck bypass valves. Fleck part #11972

Salt and chemical free Reduced backwash requirements saves water Up to 15 ppm iron Up to 6 ppm hydrogen sulfide Up to 2 ppm manganese 11 GPM recommended peak flow 9 GPM minimum required 13"x54" tank (overall height 62") 2 cubic foot KL media &...

Salt and chemical free Reduced backwash requirements saves water Up to 15 ppm iron Up to 6 ppm hydrogen sulfide Up to 2 ppm manganese 9 GPM recommended peak flow 7 GPM minimum required 12"x52" tank (overall height 60") 1.5 cubic foot KL media &...

Salt and chemical free Reduced backwash requirements saves water Up to 15 ppm iron Up to 6 ppm hydrogen sulfide Up to 2 ppm manganese 6 GPM peak recommended flow 4 GPM minimum required 10"x54" tank (overall height 62") 1 cubic foot KL media & gravel...

Set of 2 filters This is a genuine Sprite® hand held shower filter cartridge for replacing the cartridge in all Sprite® hand held shower filters. This is a pack of two. Filter should be replaced every 3 months.

Fits Pentek big blue housings that hold 4.5" filters Inner diameter ~6 inches Outer diameter ~6.75 inches Replacement filter housing wrench used to help remove filter housings when changing filters on Pentek big blue filter systems.

Standard Square Brine Tank Includes 4" Brine Well and Safety Float Standard Almond Color Holds approximately 275 lb of salt Measures 15"x17"x36" Standard square brine tank used with Autotrol control valves. Approximately 15"x15"x36" and holds...

Inline flow restrictor for reverse osmosis systems Product Features Flow Restrictor Flow restrictor to be used on waste water line of RO systems. This is designed for use with a 75 GPD membrane 1/4" Quick Connect Connects to tubing used on most filter...

The Big Blue 10" GAC filter can be used to replace a current filter or upgrade from the standard carbon block filter. The filter measures 4.5-inch in diameter and 10-inch long and fits all standard 10-inch Big Blue housings. Product...

Drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves. Holds drain line flow control button in place. O-ring included.