Description
- Standard high capacity 8% crosslink resin for low cost softening
- Choice of tank color and connection size
- Complete system with Fleck 5600SXT Digital Metered Valve, bypass, brine tank, and installation instructions
- One and a half cubic foot system for average homes with moderate hardness, max capacity 48,000 grains (48k)
- Included booklet covers setup, installation and programming, with images and access to videos so most people can install the system on their own
- Service flow: 6.5 GPM
- Peak flow: 9.8 GPM
- Flow required for backwash: 2.7 GPM
High quality, whole home water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration with the Fleck 5600SXT offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.
Main resin tank is approximately 10" x 54" (approximately 62" overall height with control head). Brine tank is approximately 14"x14"x36" tall, both tanks will be in the selected color. High capacity resin is 8% crosslink and offers effective softening at a low price. System comes with 1.5 cubic feet of resin capable of removing a maximum of 48,000 grains (48k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).
Additional Information
ASIN: |
B004GEFKN8 |
ASIN: |
B000GBZ2P6 |
ASIN: |
B00OGN3162 |
ASIN: |
B004LYGBWM |
19 Reviews
-
No more white water film
It has been nearly 1 month and the installation went just fine. No problems that could not be resolved with just one more turn to tighten or one more pvc elbow. My water is now soft and has no white residue left behind in the dish washer. I pump from my own well and the water tested hardness level of 425 ppm and it really works fine. I installed it in my well house with a new turbidity filter.
