Fleck / Pentair Controls & Parts

FILTER Valve with 12-Day Timer Lead-free brass valve body 1.5-inch connections Maximum backwash of 47 GPM Service flow rate up to 46 GPM (15 psi drop) Peak flow rate up to 60 GPM (25 psi drop) Cv...

Fleck 2850 Piston, NHWBP part number 60114-01

Fleck 3900 Lower Piston Assembly No Hard Water By-Pass  No Hard Water By Pass allowed during regeneration process with this version of the Main (Lower) Piston Assembly. PN 60107-10 has black end cap.

Seals ( Silicone )and Spacers Kit ( 60129-10 or new part number 60129-30 ) for Fleck 2850 Valve.Longer lasting silicone seals for use on chlorinated water supplys.

Fleck 5600 L-Back Downflow Metered Softener Control Valve, Paddle Wheel Meter, 120V/60Hz, U.S. Power Cord, Softener Bypass Piston, #1 Injector, 0.50 GPM BLFC, L-Style Housing, Silver/Blue Label.

Commercial 2", 2900 and 2900s Valve Lower Seal Spacer Kit.*** Includes 4 Seals (PN 11720), and 2 Spacers (10369) and 1 large black Spacer (14753)Top part of 2900 Valve uses the Fleck Seals and...

Discontinued by manufacturer Fleck Part #: 60103 Lower hard water bypass piston assembly for 2900 (2900S separate source regen) Fits the following Fleck valves: 2900 2900S

Curved spring washer used behind the Timer Mounting Plate on Fleck 5600 Valves made before 1998. part #A13299

seal quad ring part no. 10209 used in Fleck 5600, and 2500 piston end plugs.

Fleck 3/4" x 1" Kit 5810/12 Connectors Sweat (Set of 2)

Fleck 5810/12 Elbow Adapter Set  Requires you also use matching Adapter Connectors.NOTE: Not for 5800 valve

SOFTENER Valve with 12-Day Timer Lead-free brass valve body 1.5-inch connections Maximum backwash of 47 GPM Service flow rate up to 46 GPM (15 psi drop) Peak flow rate up to 60 GPM (25 psi drop) Cv...

FILTER Valve with NXT controller Lead-free brass valve body 1.5-inch connections Maximum backwash of 47 GPM Service flow rate up to 46 GPM (15 psi drop) Peak flow rate up to 60 GPM (25 psi drop) Cv...

Replacement piston assembly for the Fleck 5600 softener valve. The low water piston shortens the backwash time to 7 minutes, rather than the 10 minutes that is standard with the normal piston. These...

We carry a full line of almost ALL replacement Fleck parts for ALL models of Fleck control heads. We are working to get all these parts on our website, but due to the large number of parts available,...