Fleck / Pentair Controls & Parts

Fleck 5600 Filter Timer Valve with "L"-style bracket For filters up to 10" diameter DLFC is NOT included Flow rates: Peak: 26 GPM (25 psi drop) Continuous: 20 GPM (15 psi drop) Valve Flow Coefficient (Cv): 5 GPM (1 psi...

1700 Series Brine System for the Fleck 9500. Includes 2.0 gpm BLFC ( brine line flow control ) button.This is Fleck Assembly # 60039 and uses 1/2" brine tubing connection.

Oring for Distributor 1 1/2 inch Commercial Fleck PN 13577Used in Fleck 2850, 2900, and 9500

Newer 2900s, Large Lower Piston Assembly, PN 61555, for the Fleck 2900s and NOT older 2900 valves.This is the NHWBP ( Does NOT allow Hard Water to By Pass during regeneration cycle ) version.Meaning it allows NO water to flow past the valve while...

2850 Piston Assembly 

PISTON ROD only, Fleck 5600, PN 13001.

Flat Cap - metal for 1600 or 1700 housing PN 11893  Can also replace PN 10228

O-ring -021 PN 18879 now O-ring -124 PN 19054 Used in 1800 Brine System.****Also used on Rotor Fleck 8500 / TwinFlo 100eAnd Fleck 7000 distributor o-ring, internal 32 mm

Fleck Dist. Pilot Ring, 13/16 Fleck Distributor Pilot Ring 13/16

13/16" Pilot or Distributor o-ring ( 10244 ) used in older Fleck 1500, 2500, 5600 Valves. Newer versions will use the larger 1.05" O.D. Distributor Oring ( 13304 if 5600 or 11710 if newer 2500 or 2510 )

End Plug Fleck 5600 ( white standard ) 9000 PN 13446This part is included in the complete Piston Assembly, PN 60102-00. We typically recommend replacing the entire assembly. As shown in the 2nd photo, the older end plugs were more round at the top,...

Quick Connect 3/4" Yoke Plastic can be used with plastic bypass ( 60049 ).PN 61700 or FL56-07QCWill allow a connection to 3/4" Copper or CPVC pipe ( which both have an O.D. ( outer diameter ) of 7/8 inches ).Also referenced as 3/4" CTS ( copper tube size...

Fleck 2850/9500 Stuffer Assembly Fleck Part 16516

Fleck 2850/9500 Puller Tool. No returns on this item. 

Fleck Bypass, 5810 and 5812 Base Only, Plastic Fleck Part 43644