Fleck / Pentair Controls & Parts

2510 Mechanical Greensand Valve Replacement   No bypass or yoke connection included. 

Float for Assembly, 2310, on a 30" Rod part number 60068-30NOTE: This is only the Float assembly which includes the float, 30" tube and grommets, and does NOT include Safety Brine Valve (60014) or the actual pick up tube with air check (60002)Float rod...

DLFC Button 15 gpm Fleck 1 inch button 16736

Fleck 1-1/4" x 1-1/2" Kit 5810/12 Connectors Sweat (Set of 2) 61991-07

18" Flex Connector 3/4" x 18" Flex Connector Quick Connect 3/4" x Connection

Brine Valve Assembly, 1800, PN 60036-02 Used mostly on the Fleck 3150 and 3900 Valve.

2700, 2750, 2900 Main Piston Assembly for Higher Flow rates common for applications that use the 2700, 2750, or 2900 Fleck Model Valves.Part Number for Assembly is 60090-HF, this part comes complete with seal o-ring end plug PN 40078, old part number...

DLFC Button 12 gpm Fleck 1 inch button 16735.

DLFC Button 10 gpm Fleck 16529 Drain Line Flow Control ( DLFC ).

FL40947-02 Injector Plug Assy, w/ O-Ring' O-Ring Included. This plug is designed for use with the Fleck 5600, 7000, 9000, 9100 valves, for converting a softener into a filter. Replaces P/N FL13857

Fleck 11710, Drop Pipe O-Ring for a Fleck 9000. - Drop Pipe O-Ring used on a Fleck 9000 - Seals the drop pipe in the Fleck 9000 head.  

Replacement motor assembly Part #61835 Fits Fleck 5800, 5810, and 5812 control heads Replacement motor for the Fleck 5800 series. This includes the 5800, 5810, and 5812, and supports LXT, SXT, and XTR2 controllers.

Replacement piston assembly for the Fleck 5600 softener valve. The low water piston shortens the backwash time to 7 minutes, rather than the 10 minutes that is standard with the normal piston. These wear out over time and can cause your control head to...

Top of Tank (bottom of valve) O-ring commonly used for Fleck Valve 2850, 9500, and other 4" tank openings.

Fleck SXT Timer Assembly for 9000/9100/9500 Valve Replacement circuit board panel