Fleck / Pentair Controls & Parts

Stainless 18" Corrugated Flexible Connector 1" FIPT x 1" Quick Connect   Features: Mega-Flow Super water-flex  304 series stainless steel  Push-to-connect john guest fitting  Installs onto pipe of...

BLFC Assembly PN 61450-50 ( 0.50 gpm button included )used on Fleck 7000 Valve (and Fleck 5810, 5812)Includes plastic 3/8" fitting, 0.50 gpm BLFC button, BLFC retainer, and o-ring 13302. NO Clip (40946). That is sold separately.

Fleck 2" Brass Drain Line Flow Control Less/Buttons (100 Gallons Per Minute Max)   Fleck 2 Brass DLFC 4 Button, No Buttons   **LIMITED AVAILABILITY**

Discontinued by manufacturer   Replaces Drive Motor Replace Fleck Part #18737 and 61633-00 24v, 50/60 Hz, 1 RPM This motor moves the piston during regeneration and is a common cause of a system failing to run the regeneration cycle. The middle...

18" flex line with 3/4" quick connect and 1" female threads

Fleck Meter Cable 100" (8.3 FT) For Stainless Steel Meter   Discontinued by manufacturer

Main gear & shaft for the Fleck 5600 control head (Fleck part# 13170). This is typically the only gear that may break or wear out. Product Features Idler Gear   Fleck Part# 13017 This is a genuine Fleck part and is part# 13017 Product...

Fleck Brine Valve Assembly 9000

Transformer Fleck 24 volt 2A PN 44164 for NXT2DC not AC power supply (will not work with power heads that have AC motors, made prior to 2008)

Fleck (40538) 32 mm O-Ring Distributor Retainer

Fleck 5600 Stainless Steel 1" Yoke

Brine Line Flow Control .125 BLFC Button PN 17307

Replacement motor for the Fleck 5600SXT & SE control head (Fleck part# 16944). This is also used on the Fleck 6600/6700 valves. This is the 24V, 60Hz motor with 2 RPM. Product Features Replacement Motor Drive motor is used in the Fleck...

60125-15 Chloramine Resistant Top Seals And Spacers Kit for Fleck 5600, 9000, and 9100 Valves.*NOT for Hot Water (that is PN 60125-05)The material of the seals has three times the Chloramine resistance of the previous silicone material used.The new seals...

This kit includes 10ft of 1/2" ID clear drain line (5/8" OD), stainless steel hose clamp, and a roll of teflon tape. The stainless steel hose clamp is used to secure the drain line on the barbed drain fitting on the Fleck control head. Teflon tape is...