Fleck / Pentair Controls & Parts

2510SXT digital control head for water softeners Product Features Fleck 2510SXT Digital control built on the #1 control valve in the US. Features dual drive motors for a stronger, longer lasting control valve. For Water Softeners Metered...

Clamp ring assembly for Fleck 2510 control valve (Fleck part# 60503). Includes both clamp arms (Fleck parts# 19899 & 19900), hinge pin (Fleck part# 40000), pivot (Fleck part# 19998), and the screw & comb hardware (Fleck part# 40057). Product Features...

Part #44144 For 2510, 2750, 2850, 2900, 3150, and 3900 valves with 24v motor Input: 120V 50/50Hz 15W 1.66 Amps Replacement transformer for valves with 24V motor.

Flow meter assembly for Fleck 2510 & 5600 softener valves with screws, clips, and o-rings. Product Features Flow Meter Replaces cracked or worn-out flow meters on all Fleck 2510 & 5600 softener valves. Complete Includes flow meter, screws,...

Drain line flow control (DLFC) button 3.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12089

32mm distributor adapter reduces distributor opening in control head from 32mm to 1.05" to accept smaller distributor tubes. Commonly used with the Fleck 7000 & 9100 valves Product Features Distributor AdapterReduces the distributor opening on control...

Rebuild kit for the Fleck 5600 filter valve. Kit includes piston assembly (Fleck part# 60102-10) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600 softener valve rebuild kit, see FP-5600RBKS. Product Features Fleck 5600 Rebuild...

Paddlewheel flow meter assembly for digital SE/SXT Fleck 2510, 5600, 9000, and 9100 softener valves. Includes screws, clips, O-rings and flow straightener. Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all digital...

Five o-rings used on the Fleck 5600 Injector Body Drain Module.13303, 13302, 12638, and two of 13301

Drain line flow control (DLFC) button 2.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12087

Brine Fitting (B.L.F.C. ) assembly for Fleck 1650 brine system (common on Fleck 2510, 2750, and 2850 valves). Housing (17907), BLFC Button ( 0.25 gpm - 12818, 0.50 gpm - 12095 OR 1.0 gpm - 12097) and BLFC Retainer (12098) included.

Fleck 1-1/4" Kit 5810/12 Connectors, NPT Fleck 1-1/4" Kit 5810/12 Connectors, NPT

Replacement square front panel assembly includes circuit board for Fleck 5600SXT. Fleck part #61672-0201. Product Features Includes Circuit Board Front panel assembly include circuit board for replacement on 5600SXT heads. Square Style Replacement...

Hot water seal and spacer kit for the Fleck 5600 & 4650 valves. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part#...

Seal and spacer kit for the Fleck 5000 and Proflo. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes 5 Seals, 4 regular Spacers, and 1 special End Spacer (the end spacer goes in first, flat side...