Fleck / Pentair Controls & Parts

Adapter base for Fleck 2510 control head (Fleck part# 19322). The adapter base threads are 2.5-inch and fit standard mineral tanks. This is the adapter base only and doesn't include the base seal,...

Check valve air draw for 5600SXT air injection valve

Service and rebuild kit for Fleck 2510 AIO (Air Injection) Piston, seals, and spacers - 61670-00 (61662-01) Inlet check valve coupler - 19228-02 Air draw check valve - 62116 Stuffer tool -...

Fleck Part #60015-00 Replacement downflow piston assembly Fits Fleck 5000/Proflo downflow valves Replacement piston assembly for Fleck the 5000/Proflo downflow valves. The downflow valve is the...

Transformer Fleck Electronic 24 volt 19674 ( newer PN 44147 ) for Fleck 24v Timer Motors as well as Models SXT and SE.24 volt 60 hz 400 ma. with wiring.    This is the transformer provided by Fleck...

2510SXT digital control head for filter systems Product Features Fleck 2510SXT Digital control built on the #1 control valve in the US. Also features dual motors for a longer lasti

Brine line flow control (BLFC) button 0.5 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12095

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to

Overflow Fitting With Nut attaches to the side of the brine tank. This fitting allows you to attach a drain hose (1/2" ID) to a floor drain to divert the water should the salt tank start to over fill.

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with...

Genuine Fleck part #14805 Replacement gasket for injector body Replacement injector body gasket for the Fleck 2510 and 2510SXT valves.

Drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves. Holds drain line flow control button in place. O-ring included.

The Top Distributor Basket is a bayonet-style twist-on basket for Fleck 7000 control valve that fits the larger 32mm distributor tube. This top distributor basket is designed to prevent any of the...

1/2-inch male thread 1/2-inch barbed Common drain fitting for Fleck Straight barbed fitting uses standard 1/2-inch male threads and has a barbed connection for 1/2-inch inner diameter tubing...

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.